ABOUT PRODUCTS RESOURCES QUOTES/ORDERING  
1-800-762-2478   Facebook Twitter Twitter 


 Abrasion
 Adhesion
 Application
 Color/Gloss
 Density
 Dispersion
 Drum Handling
 Drying Time/Gelation
 Film Flaws
 Film Thickness
 Hardness
 Impact & Flexibility
 Lab Apparatus
 Measuring Instruments
 Moisture/Air/Temp.
 Optical Instruments
 pH & Conductivity
 Publications
 Surface Profile
 Surface Tension
 Viscosity
Home  >>  Products  >>  Application  >>  Leneta Paint Test Charts
Leneta Paint Test Charts

Legend
BG= Black & Gray GW= Gray & White
BW= Black & White RG= Red & Gray

Opacity Charts

top
Form 2A and 2C Form 14H and 15H

Form 2A Form 2C Form 14H Form 15H
5-1/2 x 10in (140 x 254 mm) 7-5/8 x 10-1/4 in (194 x 260 mm) 11-1/4 x 17-1/4 in (286 x 438 mm)
Design Area = 1.076 ft2 = 0.1m2
11-1/4 x 17-1/4 in (286 x 438 mm)

Form 5C Form 3B

Form 5C Form 3B
7-5/8 x 10-1/4in (194 x 260mm) 7-5/8 x 11-3/8in (194 x 289mm)

 

Penetration Charts

top
Form HK  

Form HB  
7-5/8 x 11-1/4in (194 x 286mm)

 

Penopac Charts

top
Form 1A Form 18A Form 19BR

Form 1A Form 18A Form 19BR
5-1/2 x 10in (140 x 254 mm) 5 1/2 x 10in (140 x 254 mm) 7-5/8 x 11-3/8in (194 x 289 mm)

Form 1B Form 18B

Form 1B Form 18B
7-5/8 x 11-3/8in (194 x 289 mm) 7-5/8 x 11-3/8in (194 x 289 mm)

 

Sag and Leveling Test Charts

top
Form 7B

This form was designed for use with the LENETA Anti-Sag Meter and the NYPC Leveling Test Blade. Its special characteristic is the provision of an applicator path with a considerable length of black in the middle.

Thus by making the test observation only over the black area there is automatic compliance with the test procedure instructions to ignore the leading and trailing edges of the drawdown.


Form 7B  
7-5/8 x 11-3/8in (194 x 289 mm)

 

Display Charts and Checkerboard Charts

top
Form 8A Form 8B Form 10A Form 10B

Display Form 8A Display Form 8B Checkerboard Form 10A Checkerboard Form 10B
5 -1/2 x 10in (140 x 254 mm)
Design Area = 275cm2
7-5/8 x 11-3/8in (194 x 289 mm)
Design Area = 425cm2
5 -1/2 x 10in (140 x 254 mm)
Design Area = 275cm2
7-5/8 x 11-3/8in (194 x 289 mm)

 

Opacity Display Charts and Logicator Charts

top
Form 9A and 9B Form 23B

Display Chart Form 9A Display Chart Form 9B Logicator Chart Form 23B
5 -1/2 x 10in (140 x 254 mm) 7-5/8 x 11-3/8in (194 x 289 mm) 7-5/8 x 11-3/8in (194 x 289 mm)

 

Spreading Rate Charts

top
Form 8H Form 10H Form 10H-GB

Form 8H Form 10H Form 10H-GB
Design Area 0.538 ft2
500cm2 (0.05m2)
Overall Size 8-5/8 x 11-1/4in (219 x 286 mm)
 

Form 12H Form 13H

Form 12H Form 13H
Please ask about HALF SIZE spreading rate charts!

 

Half Size Spreading Rate Charts

top
Form HK Form HK

Form 8K Form 8K-GW

Black & White
Design Area 0.538 ft2, 500cm2, (0.05m2)
Overall Size 8-5/8 x 11 1/4in (219 x 286 mm)

Gray & White
Design Area 0.538 ft2, 500cm2, (0.05m2)
Overall Size 8-5/8 x 11 1/4in (219 x 286 mm)

 

Unlacqured Test Charts

top
Form N2C Form N2A Form N9A

Form N2C Form N2A Form N9A
7-5/8 x 10-1/4in (194 x 260 mm) 5-1/2 x 10in (140 x 254 mm) 5-1/2 x 10in (140 x 254 mm)

 

Duplex Applicator Charts

top
Form 6F6 Form 6F4 Form WF

Form 6F6 Form 6F4 Form WF

 

Wash & Polish Cards

top
Form WP-1  

Form WP-1  
5-1/2 x 10in (140 x 254mm)

 

Brushout Cards

top
Brushout Cards

Form 2DX Form 5DX Form DX-GW Form WDX

 

Metopac Panels

top
Metopac Panels Metopac Panels
Size 132 x 279mm (5-3/16 x 11 in)
Area: 368cm2
Physical Characteristics Technical Data
Black & White
Thickness (prox.): 0.33mm (0.013in)
Weight per: T12G: 24kg (53lb)
Thous. (prox.): T12M: 88kg (195lb)
Size 76 x 132mm (3 x 5-3/16 in)
Area: 100cm2 (Allowing for 6mm (1/4") diameter hole)
 
 
  • Forms T12G & T12M, Painted Steel Panels for Measuring the Hiding Power of Powder Coatings and Industrial Enamels
  • Black Surface: Solvent Resistant, Non-bleeding, Reflectance: 1% max
  • White Surface: Solvent Resistant, Color Retentive, Reflectance: 80% min
  • Measured per ASTM Method E 1347
  • T12G Panel also available with NO HOLE. Call for pricing.

 

Clear Polyester Panels

top
For Evaluation of Gloss – Transparency – Hiding Power - These are super glossy and level test surfaces to replace cumbersome glass panels in evaluating the gloss and transparency of coatings. They offer absolute surface uniformity for critical gloss measurements. The transparent substrate also finds use in the evaluation of hiding power.

Technical Data Form Number Identification of Standard Types, Thickness & Sizes
Type P300 Standard Sizes
Thickness:
4 mils(100μm)
Form No. P300-4C
Form No. P300-4G
7 mils (175μm)
P300-7C
P300-7G
7-5/8 x 10-1/4
3 x 5-1/2 inches

194 x 260
76 x 140 mm

(Special sizes on request):

 

Wood Panels

top
Technical Data Form Number Identification of Standard Types, Thickness & Sizes
For Color Matching and Demonstration of Stains
Form Type of Wood Thickness - Inches Size - Inches Dimensions - mm
Thickness - mm
R1A Birch Plywood 0.156 5-1/2 x 10 4.0 140 x 254
R1D 3-1/2 x 6 89 x 152
*R7A Wood Veneer2 0.09 5-1/2 x 10 0.23 140 x 254
*R7D 3-1/2 x 6 89 x 152
* This is real wood laminated to paper. The wood is Japanese Kiri which is light in color, with an open grain that
gives attractive stain effects. The fact that these panels are so thin makes them much more convenient for filing or mounting than conventional wood panels

 

Upson Fiberboard Panels

top
Technical Data Form Number Identification of Standard Types, Thickness & Sizes
Thickness: 3/16 inches (5 mm) - Form Numbers of Standard Sizes
Form Size - Inches Size - mm
R6-612 6 x 12 152 x 305
R6-912 9 x 12 229 x 305
R6-1218 12 x 18 305 x 457
*R6-1224 12 x 24 305 x 610
*This size is used in ASTM Method D3928, Evaluation of Gloss and Sheen Uniformity of Wall Paints.

 

Leneta ASTM Scrub and Staining Media

top
Technical Data Form Number Identification of Standard Types, Thickness & Sizes
Non-Abrasive Type SC-1
ASTM D3450 Test for Washability Properties
Abrasive Type SC-2
ASTM Method D2486, D4213 and D3450,
Scrub Resistance and Washability Tests.
Non-Abrasive Type ST-1
ASTM D3450 Test for Washability Properties
Abrasive Type ST-3
ASTM Method D3258,
Test for Stain Resistance and Porosity.

 

Leneta Scrub Test Panels

top
Typical Failure Using Shim Typical Failure Without Shim
Typical Failure Using Shim, Per ASTM Method D-2486 Typical Failure Without Shim
 

Form P121-10N Black Plastic - Smooth Matte Surface
Thickness: 10 Mils (0.25 mm) - Size: 6-1/2 X 17 Inches (165 X 432 mm) - Used in ASTM D 2486, D 3450, D 4213, TT-P-29, and other scrub test procedures.In above illustrated tests the paints were applied without priming directly onto Scrub Test Panels. Note that the films have worn down to a feather edge with no sign of adhesion failure. Also Available: White Scrub Test Panels–Form P123-10N used with dark colored paints; same properties as Form P121-10N except for color. - Click Here for Pricing

 

Scrub Test Calibration Panels

top
For Evaluation of Gloss – Transparency – Hiding Power - These are reference standards prepared by applying white emulsion paints on black scrub test panels. The films are indefinitely stable, and for each type the panels are essentially identical. They are used as controls in the measurement of scrub resistance, to obtain Calibration Ratings that normalize the wide variations often encountered for undefined reasons, among laboratories using the same scrub test method.
Type A: Form P121-A
Poor Scrub Resistance
Low Quality Flat
Type C: Form P121-C
Good Scrub Resistance
Good Quality Flat

 

Release Paper

top
For Preparing Free Films of Organic Coatings
Form RP-1K - Thickness: 5 mils (0.13 mm) Size: 8-5/8 x 11-1/4"(219 x 286 mm) - This paper is smooth-surfaced and sealed on both sides, one side being glossy and the other matte. The glossy side has a silicone finish with a balanced release characteristic that avoids excessive crawling with solvent or water dispersed coatings while permitting easy stripping of dried films. It is recommended for ASTM D 2370, D 4708, D 1653 and other free-film test methods.

 

Alu-Cards

top
Aluminum Foil – Paperboard Panels - These are low cost metallic substrates to replace expensive solid metal panels where primary interest is in surface appearance. The test surface has a high metallic lustre. The cards are 18 mils thick and have a 1/4 inch (6 mm) hole punched at one end. In addition to lower cost, a major advantage over regular metal panels is that they are much lighter in weight and therefore much more conveniently stored.

Form Identification of Standard Sizes and Types Technical Data
Size Foil on One Side
Inches mm Primed1 Unprimed2
5-1/2 x 10 140 x 254 AAX-1P
AGX-1P
AAX-2N
AGX-2N
3 x 5-1/2 76 x 140
Notes:
(1) Has a clear organic primer for improved adhesion.
(2) Foil on both sides for minimal bake distortion. Bright side is unprimed & conductive.
(3) Spray stand and special adapters available for lightweight Alu-card panels.

 

Plain White Cards

top
Technical Data Physical Characteristics
Normal Thickness 12 Mils (0.3mm)
Form Size-inches Size-mm
*WA 5-1/2 x 10 140 x 254
*WB 7-5/8 x 11-1/4 194 x 286
*WD 3-7/8 x 6 98 x 152
WF 3 x 7-1/4 76 x 184
* These have a 1/4 in (6mm) hole, centered 3/16 in (5mm) from top edge.
WG 3 x 5 1/2 76 x 140
WH 11-1/4 x 17-1/4 286 x 438
WK 8-5/8 x 11-1/4 219 x 286
WM 5-1/2 x 11-1/4 140 x 286
Normal Thickness 20 Mils (0.5mm)
Form Size-inches Size-mm
WBX 7-5/8 x11-1/4 194 x 286
WDX 3-7/8 x 6 98 x 152
WKX 8-5/8 x 11-1/4 219 x 286
WHX 11-1/4 x 17-1/4 286 x 438

 

Plain Black Cards

top
Technical Data
Normal Thickness 12 Mils (0.3mm)
Form Size-inches Size-mm
BK 8-5/8 x 11-1/4 219 x 286
BH 11-1/4 x 17-1/4 286 x 438

 

Leneta Spray Monitors™ and Self-Adhering Hiding Power Labels

top
Leneta Spray Monitors These are pressure-sensitive labels with a hiding power test pattern and a sealed, solvent-resistant surface. They are for use in conjunction with metal panels and other substrates where uniform surface appearance provides no visual clues as to the thickness of an applied paint film. When placed on such a test surface the Monitor presents a contrasting feature by which to observe the hiding during spray application, thereby facilitating film thickness control. It adheres firmly whether air-dried or baked, thus presenting a permanent visual record of film opacity. Leneta Spray Monitors Form M12-BW Black & White Also available in Black & Gray (M12-BG) & Red & Gray (M12-RG) Size: 1 x 1 in (25 x 25mm) Oxide red simulates industrial primers
Form M33-RG Red & Gray (SHOWN) Also available in Black & Gray (M33-BG) & Black & White (M33-BW) Size: 2 x 2 in (51 x 51mm)

Leneta Spray Monitors
 
Leneta Spray Monitors

 

Printing Ink Drawdown Sheets

top
Printing Ink Drawdown Sheets
  • Made with Eight Representative Grades of Paper

  • Sheet Size: 5 x 7-5/8 in. (127 x 194 mm)

  • Paper: Non-Fluorescent, Unwatermarked

  • Ink: Jet Black, Non-bleeding

  • Padding: 100 sheets per pad

  • Packaging: 1000 sheets (10 pads) per box

Technical Data Paper Description and Form Number Identification
Form 3NT-1 3NT-21 3NT-31 3NT-34 3NT-41 3NT-5 3NT-8 3NT-9
Type of
Paper:
Vellum Opaque Fluores. Coated
Book
Un-water maked Non-fluores. Regular
Bond
Unbleached
Kraft
Web-offset
Coated
Un-water marked Non-fluores.
Shade: Neutral
White
Neutral
White
Optical
Brightner
Jet Black Neutral
White
Brown Neutral
White
Jet Black
Basis WT.
(Substance):
60lb. 15lb. 80lb. 80lb. 20lb. 40lb. 45lb. 125lb.
Size Basis
(Inches):
25x38 5x7 - 5/8 25x38 25x38 5x7 - 5/8 24x36 25x38 5x7 - 5/8
Grammage
(g/m3):
89 56 118 118 123 65 67 203
Caliper (mils): 5.0 2.5 3.7 3.7 5.0 4.0 2.5 10.0
Caliper (μm): 127 64 94 94 127 102 64 254
Density (g/cm3): 0.70 0.89 1.26 1.26 0.97 0.64 1.05 .80
NOTES:
1. Indicated weights, densities and calipers are nominal and/or approximate.
2. These papers are absorbent despite their high level of transparency

 

Video

top

 

Legend
BG= Black & Gray GW= Gray & White
BW= Black & White RG= Red & Gray


Prices

top
Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item No. Quantity Per Box Box Weight (lbs) Prices Item No. Quantity Per Box Box Weight (lbs) Prices
1A 250
6
$69.75
M12-RG
2000
1
243.00
*1B 250
9
89.25
M33-BW
500
1
57.00
*2A 250
6
69.75
M33-RG
500
1
122.00
*2C 250
9
85.75 M71-BG
500
6
208.00
2DX
500 7
67.00
M71-BW
500
6
167.00
*3B
250
9 89.25
M72-BG
500
6
208.00
3NT-1
1000
7
110.00
M72-BW
500 6
167.00
3NT-21 1000
4
135.00
N2A 250
6
66.50
3NT-31
1000
7
91.25
N2C
250
9
80.75
3NT-34
500 5
57.00 N9A
250
6
66.50
3NT-41 1000
6
71.50
NWK
250
11 76.25
3NT-5
1000
5
104.00
P121-10N
100
7
272.00
*3NT-8 1000 5 127.00
P123-10N 100
7
242.00
3NT-9 500 3 66.95 P121-A
3
2
63.00
5C
250
9 86.25
P121-C
3
2
63.00
5DX
500
7
67.00 P300-4C
125
3
102.00
5DX-GW
500
7
77.00
P300-4G
250
2
51.00
6F4 500
5
73.25
P300-7C
125
4
104.00
6F6
500 5
73.25
P300-7G
750
2
51.00
7B
250
9
89.25
R1A
50
11
136.00
8A
250
6 69.75
R1D
100 8
120.00
8B 250
9
89.25
R7A
100
5
297.00
8H-BW
125
11
103.00
R7D 100
2
102.00
8H-GW
125
11
119.00
R6-612
150
43
197.00
8K-BW
250
11
119.00 R6-912
100
43
197.00
9A
250
6
69.75
R6-1218
50 43
197.00
9B
250
9
89.25
R6-1224
40
46
211.00
10A
250 6 69.75
RP-1K
250
8
141.00
10B 250
9
89.25 S71-BG
500
5
145.00
10H-BG
125
11
119.00
S71-RG
500 5
201.00
10H-BW
125
11
103.00
S72-BW
500
5
99.75
12H-BW
125
11
103.00
S72-BG 500
5
145.00
13H-BW
125
11
103.00
T12G
125
8
152.00
14H-BW 125 11
103.00
T12M
50 12
230.00
15H
125
11 103.00 WA
250
6
64.50
18A
250
6
69.75
WB 250 10
84.50
18B 250
9
89.25
WBX
125
7
63.50
19BR 250
9
89.25
*WD
1000
10 119.00
23B 250 9
89.25
WDX 500
7
61.75
24B 250
9
128.00
WF
500 5
60.00
AAX-1P 125
5 67.00
WG
1000
8
101.00
AAX-2N 125
5
83.00
WH
125
11
91.75
AGX-1P 500
6
90.00
WHX
75
10 86.00
AGX-2N 500 6
112.00 WK
250 11
98.50
BH 125 11
114.00
WKX
125
8
71.50
BK 250 11
122.00
WM
250 7
64.50
CP-1 1000 10
57.00
*Also available in High Bright
CP-2 1000 9 59.00
HB 250 11
99.00
M12-BG 2000 1
139.00
M12-BW 2000 1
108.00



top

Call HAVE QUESTIONS?
    1-800-762-2478
Email PREFER TO EMAIL?
    gardner@gardco.com
  FIND PRODUCTS LEARN MORE ORDERING INFO ABOUT US
  By Category Email Registry How to Order Contact Info
  By Industry Trade Shows Request Quote History
  New Products Test Lab Info Order Form FAQ's
  Monthly Product Articles/Links Sales & Clearance Policies




  © 2018 Paul N. Gardner Company, Inc. | Contact | Policies Facebook  Twitter  YouTube  Blogger