ABOUT PRODUCTS RESOURCES QUOTES/ORDERING  
1-800-762-2478   Facebook Twitter Twitter 


 Abrasion
 Adhesion
 Application
 Color/Gloss
 Density
 Dispersion
 Drum Handling
 Drying Time/Gelation
 Film Flaws
 Film Thickness
 Hardness
 Impact & Flexibility
 Lab Apparatus
 Measuring Instruments
 Moisture/Air/Temp.
 Optical Instruments
 pH & Conductivity
 Publications
 Surface Profile
 Surface Tension
 Viscosity
Home  >>  Products  >>  Adhesion  >>  ZSF 2196
ZSF 2196

Scratching Tool

Meets ASTM D 3359(A); ISO/DIS 17872; EN ISO 2409

ZFS 2196

Scratching tool for carrying out scribe marks through coatings on metal substrates for corrosion testing or for cross-cut tests on curved surfaces

Corrosion Adhesion - Many standards describe corrosion tests where a coating has to be prepared with scribe marks that penetrate it completely down to the metal substrate. Two possible instruments are scratching tools according to Sikkens or Clemen. The Cross-cut application is explained in the introduction adhesion.




FEATURES TECHNICAL DATA APPLICATIONS MORE INFO PRICE LIST
 

 

Features

top
  • Ergonomic design for comfortable and fatigue-proof handling
  • Fast and easy changing of hard metal cutters for carrying out scribe marks according to Sikkens or Clemen or for cross-cut tests on curved surfaces, respectively
  • Easy to handle

 

Technical Data

top
Technical Data
Versions Hard Metal Cutter Standards
2196.C According to ISO/DIS 17872
2196.S 1 mm (0.04") according to ISO/DIS 17872
2196.S0.5 0.5 mm (0.02") according to ISO/DIS 17872
2196.ZCC Cross-cut ASTM D 3359, EN ISO 2409
Material Scratching Tool: Red anodized aluminum
Material Hard Metal Cutter: Carbide
Dimensions (LxWxH): 110 mm x 80 mm 58 mm (4.33" x 3.15" x 2.28")
Weight: 295 g (0.65 lbs)
Warranty: 2 years

 

Application Areas

top
  • Preparatory tool for corrosion testing. Laboratory tool for quality control or research and development
  • For several branches of industry such as the paint and varnish industries, powder coaters or the automotive industry.
  • Practically applicable on all single and multi-coat systems on metal substrates
  • Cross-cut tester for the evaluation of adhesion of single or multi-coat systems on curved surfaces.
ZFS 2196 Zoomed In

 

Handling (without Cross-Cut)

top
  • Scribe marks are made onto the test panels at the beginning of the corrosion test and again defined intervals.
  • Ensure that the test panel is firmly secured to prevent panel or tool slippage.
  • Place the scratching tool on the coating as vertical as possible.
  • Use a metal ruler for guiding the scratching tool.
  • Pull the scratching tool over the coating at a uniform speed. The hard metal cutter should penetrate the coating completely down to the substrate.
  • If the scribe mark is not deep enough after the first scribing, use the scratching tool several times if necessary without moving the guiding ruler so that all scribe marks are in the same track.
  • Remove debris thoroughly.

 

Prices

top
Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item Number Item Prices
2196.C, 2196.S and 2196.S0.5:
1 scratching tool, 1 instruction manual, 1 hard metal cutter, 1 certificate of manufacturer, 1 allen key, 1 carrying case

2196.ZCC additionally with:

1 scratching tool, 1 instruction manual, 1 hard metal cutter, 1 certificate of manufacturer, 1 allen key, 1 carrying case, 1 roll adhesive tape ACC753, 1 magnifier (length: 50 m (164 ft.) width: 25 mm (0.98")), 1 brush , 1 flexible ruler
PA-930145 2196.C Scratching tool according to Clemen $474.00
PA-930149 2196.S Scratching tool according to Sikkens with 1 mm (0.04") Hard Metal Cutter 474.00
PA-930151 2196.S0.5 Scratching tool according to Sikkens with 0.5 mm (0.02") Hard Metal Cutter 519.00
PA-930155 2196.ZCC Scratching tool for cross-cut tests on curved surfaces 727.00
Options
PA-930165 ACC725 hard metal cutter according to Clemen 278.00
PA-930169 ACC491 1 mm (0.04") hard metal cutter according to Sikkens 214.00
PA-930171 ACC500 0.5 mm (0.02") hard metal cutter according to Sikkens 278.00
PA-930175 ACC951 hard metal cutter for cross-cut tests on curved surfaces 285.00
PA-930181 ACC403 microscope with possibility of taking digital pictures 372.00
PA-930185 ACC041 magnifier 25.00



top

Call HAVE QUESTIONS?
    1-800-762-2478
Email PREFER TO EMAIL?
    gardner@gardco.com
  FIND PRODUCTS LEARN MORE ORDERING INFO ABOUT US
  By Category Email Registry How to Order Contact Info
  By Industry Trade Shows Request Quote History
  New Products Test Lab Info Order Form FAQ's
  Monthly Product Articles/Links Sales & Clearance Policies




  © 2018 Paul N. Gardner Company, Inc. | Contact | Policies Facebook  Twitter  YouTube  Blogger