Wet Film Thickness Gauges with wheels (microns)
Inmont Gage L, 0-40 µm
Wet Film Thickness Gauge - thin coatings, rotating scale
- Full Scale Calibration Range: 0 - 40 μm
- Recommended: 8 - 32 μm
- Resolution: 2 μm
- For very thin coatings and accurate measurements on moving surfaces
- Inside is hollowed out; very lightweight – only 0.3 lb
- Black rotating scale to minimize reading errors
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
The Interchemical Thickness Gage, also known as IC or Inmont gage, has long been the standard for measuring wet film thickness in the coatings industry (U.S.Patent No. 3,128,558). It is ideal for thin film applications and used for measuring wet ink film at the press.
BYK-Gardner offers three basic models in various ranges: Model S - general use, Model R - rotating scale, Model L - Low inertia with rotating scale. All models have an accuracy of +/- 0.0001 in (2.5 μm) or 2.5% full scale, whichever is greater.
- Very accurate for thin film applications
- Can be used with moving surfaces
- Easy to clean
- Stainless steel construction for long life
- Metric or mils version available
- Compliant with ASTM D1212 and ISO 2808 methods
- Gage holder optionally
| Thickness Measurement | |
|---|---|
| Measuring Range Mils / µm | |
| Full Scale Calibration Range | |
| Recommended | |
| Scale | |
| Resolution | |
| General | |
| Model | |
| Weight | |
| Weight | |
| Dimensions | |
| Dimensions | |
| ASTM | D1212 |
|---|---|
| ISO | 2808 |
Brochure
- Wet-Film-Thickness-Gauges-with-Wheels-microns_20250131.pdf
Wet-Film-Thickness-Gauges-with-Wheels-microns_20250131.pdf
The gage consists of an eccentric inner wheel, supported by two larger outer concentric wheels. At a specific point, the inner wheel touches and picks up wet film when the gage is rolled on the coated surface. This critical clearance may be read on a rotating scale.
The gages may be held between the thumb and forefinger to take a reading, or it may be inserted into the gage holder. This holder is widely used to measure coatings safely on moving surfaces such as high-speed press rollers. It can also be used on stationary, flat, or curved surfaces since the holder makes it easier to exert a steady, even force on the gage.
Holder for Inmont Gage
Article No: 6580
Inmont Gauge Case
Article No: 14016
Inmont Gage L, 0-40 µm, w/ Cert
Article No: 16965
Inmont Gage S, 200-700 µm, w/ Cert
Article No: 16554
Inmont Gage L, 0-20 µm, w/ Cert
Article No: 16515
Inmont Gage R, 0-2 mils, w/ Cert
Article No: 16516
Inmont Gage R, 200-700 µm, w/ Cert
Article No: 16544
Inmont Gage R, 50-250 µm, w/ Cert
Article No: 16543
Inmont Gage S, 0-40 µm w/ Cert
Article No: 16551
Inmont Gage S, 0-20 µm, w/ Cert
Article No: 16550
Inmont Gage R, 0-100 µm, w/ Cert
Article No: 16542
Inmont Gage S, 50-250 µm, w/ Cert
Article No: 16553
Inmont Gage R, 0-40 µm, w/ Cert
Article No: 16541
Inmont Gage S, 0-100 µm, w/ Cert
Article No: 16552
Inmont Gage S, 200-700 µm
Wet Film Thickness Gauge with wheels - original design
Article No: 6554
Inmont Gage R, 0-40 µm
Wet Film Thickness Gauge with rotating scale
Article No: 6541
Inmont Gage R, 200-700 µm
Wet Film Thickness Gauge with rotating scale
Article No: 6544
Inmont Gage L, 0-20 µm
Wet Film Thickness Gauge with rotating scale
Article No: 6515
Inmont Gage R, 0-100 µm
Wet Film Thickness Gauge with rotating scale
Article No: 6542
Inmont Gage R, 0-20 µm
Wet Film Thickness Gauge with rotating scale
Article No: 6516
Inmont Gage S, 0-40 µm
Wet Film Thickness Gauge with wheels - original design
Article No: 6551
Inmont Gage R, 50-250 µm
Wet Film Thickness Gauge with rotating scale
Article No: 6543
Inmont Gage S, 0-100 µm
Wet Film Thickness Gauge with wheels - original design
Article No: 6552
Inmont Gage S, 50-250 µm
Wet Film Thickness Gauge with wheels - original design
Article No: 6553
Inmont Gage S, 0-20 µm
Wet Film Thickness Gauge with wheels - original design
Article No: 6550
