Grind Gages - µm or mils with extra deep grooves, 2 paths
Art. No.: 2513
Grind Gage No. PB-20
Grind gage - groove depth range 0-20 mils
- Path Size: 0.5 x 8 in
- No. of Paths: 2
- Scales: Mils
- Range: 0 - 20
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
The Fineness of Grind Gage is a flat steel block in the surface of which are two flat-bottomed grooves varying uniformly in depth from a maximum at one end of the block to zero near the other end. Groove depth is graduated on the block according to the scales used for measuring particle size. The grind gages with extra deep groove are available either with "Microns - scale" or "Mils - scale".
- Grind blocks made of high quality, corrosion resistant stainless steel for extended use
- Dual channel designs
- Groove depth is graduated on the block showing either microns or mils scales
- Made from ANSI 440C Stainless Steel
| Technical Specifications | |
|---|---|
| Path Size | |
| Scales | |
| No. of Paths | |
| Range | |
| General | |
| Weight | |
| Weight | |
Grind block
Scraper (2514)
Storage case
Scraper (2514)
Storage case
Brochure
- Technical_Data_Sheet_Grind-Gages_um-or-mils-with-extra-deep-grooves_2paths_261124.pdf
Technical_Data_Sheet_Grind-Gages_um-or-mils-with-extra-deep-grooves_2paths_261124.pdf
Grind Gage No. PD-250
Grind gage - groove depth range 0-250 µm
Article No: 2512
