Formed Film Applicator Rods
Formed Rod, 2.8 mils, 1/4" dia.
- Formed Rod
- 2.8 mils
- 1/4" diameter
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
- No wires to break
- Easier Cleanup
- Less Expensive
- Uniform spacing
- Little change to overall dia.
- Formed - the grooves have a wide radius at the bottom (like a "U")
- Wire Wound - the "valley" between windings comes to a point (like a "V")
- Applications: Adhesives, Board, Cellulose, Ceramic Colors, Cosmetics, Driers, Duplicating Inks, Emulsions, Fillers, Floor Polishes, Lacquers, Metallic Powders, Oils, Paper, Photographic Papers, Pigments, Plastics, Printing Inks, Resins, Varnishes, Waxes and Hotmelts
- Click here to see the Wet Film Thickness Conversion Chart
| Technical Data Chart | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Data |
| ||||||||||
Drawdowns are an inexpensive method of making laboratory samples to determine coating thickness, substrate penetration, fluid compatibility, bond strength, etc. Drawdown rods enable the technician to perform these tests with a minimum of effort. The procedure is as follows:
- Attach (or tape) a sample of the most suitable substrate to the glass surface of the Drawdown Plate.
- Using a spatula, place a small pool of coating liquid near the top of the sample sheet.
- Immediately grasp the ends of the Drawdown Rod. Using the thumbs of both hands to keep the rod from bowing or bending away from the sample, draw the rod down through the liquid pool spreading and metering the fluid across the sample sheet. As the drawdown is made, note the behavior of the coating and any possible reaction with the substrate. (Note: It may be convenient to construct a small trough of cardboard to catch the excess liquid as it is drawn to the bottom edge of the drawdown board.) Immerse rod in Cleaning Tray after use.
- The coated sample is now ready for testing.
- If the coating application is too thin, use a rod with a larger diameter wire. Hence, if the coating is too thick, use a rod with a smaller diameter wire.
Vacuum Plate S, black anodized, 9x12"
Article No: 3876
Vacuum Plate, Stainless Steel 9x12"
Article No: 3882
Drawdown Plate, Glass 14" x 10"
Article No: 4262
Bench Rack for 16" Rods
Article No: 10136
Vacuum Plate, Aluminum 12x18”
Article No: 11205
Glass Drawdown Plate 14" X 16"
Article No: 11210
Scrub Brush for PAT Kit
Article No: 12647
Formed Rod, 8.5 mils, 5/8" dia.
Article No: 14235
Formed Rod, 3.0 mils, 3/8" dia.
Article No: 14231
Formed Rod, 3.0 mils, 10mm dia.
Article No: 14232
Formed Rod, 5.0 mils, 10mm dia.
Article No: 14233
Formed Rod, 3.8 mils, 1/2" dia.
Article No: 14234
Formed Rod, 6.0 mils, 1/2" dia.
Article No: 10392
Formed Rod, 2.6 mils, 3/8" dia.
Article No: 10341
Formed Rod, 0.7 mils, 1/4" dia.
Article No: 10291
Formed Rod, 0.6 mils, 1/4" dia.
Article No: 10290
Formed Rod, 2.6 mils, 1/2" dia.
Article No: 10383
Formed Rod, 0.3 mils, 1/4" dia.
Article No: 10287
Formed Rod, 1.8 mils, 1/2" dia.
Article No: 10380
Formed Rod, 3.0 mils, 1/2" dia.
Article No: 10385
Formed Rod, 0.2 mils, 1/4" dia.
Article No: 10286
Formed Rod, 1.0 mils, 3/8" dia.
Article No: 10333
Formed Rod, 0.8 mils, 3/8" dia.
Article No: 10332
Formed Rod, 2.0 mils, 3/8" dia.
Article No: 10338
Formed Rod, 1.2 mils, 3/8" dia.
Article No: 10334
Formed Rod, 0.5 mils, 3/8" dia.
Article No: 10330
Formed Rod, 0.3 mils, 3/8" dia.
Article No: 10328
Formed Rod, 1.4 mils, 3/8" dia.
Article No: 10335
Formed Rod, 9.5 mils, 1/4" dia.
Article No: 10325
Formed Rod, 3.6 mils, 1/2" dia.
Article No: 10387
Formed Rod, 9.0 mils, 1/4" dia.
Article No: 10324
Formed Rod, 7.0 mils, 1/4" dia.
Article No: 10320
Formed Rod, 5.5 mils, 1/2" dia.
Article No: 10391
Formed Rod, 1.4 mils, 5/8" dia.
Article No: 10410
Formed Rod, 2.0 mils, 10mm dia.
Article No: 10364
Formed Rod, 0.7 mils, 1/2" dia.
Article No: 10372
Formed Rod, 0.2 mils, 3/8" dia.
Article No: 10326
Formed Rod, 4.9 mils, 1/4" dia.
Article No: 10315
Formed Rod, 6.0 mils, 1/4" dia.
Article No: 10318
Formed Rod, 0.6 mils, 10mm dia.
Article No: 10358
Formed Rod, 0.5 mils, 1/2" dia.
Article No: 10370
Formed Rod, 0.4 mils, 10mm dia.
Article No: 10356
Formed Rod, 2.4 mils, 1/2" dia.
Article No: 10382
Formed Rod, 0.2 mils, 1/2" dia.
Article No: 10367
Formed Rod, 4.7 mils, 1/4" dia.
Article No: 10313
Formed Rod, 2.2 mils, 3/8" dia.
Article No: 10339
Formed Rod, 2.0 mils, 1/2" dia.
Article No: 10381
Formed Rod, 3.8 mils, 1/4" dia.
Article No: 10308
Formed Rod, 0.4 mils, 1/4" dia.
Article No: 10288
Formed Rod, 3.2 mils, 1/2" dia.
Article No: 10386
Formed Rod, 7.0 mils, 3/8" dia.
Article No: 10352
Formed Rod, 9.0 mils, 3/8" dia.
Article No: 10354
Formed Rod, 3.4 mils, 1/4" dia.
Article No: 10306
Formed Rod, 4.0 mils, 1/2" dia.
Article No: 10388
Formed Rod, 3.0 mils, 1/4" dia.
Article No: 10304
Formed Rod, 1.2 mils, 1/2" dia.
Article No: 10376
Formed Rod, 0.5 mils, 5/8" dia.
Article No: 10403
Formed Rod, 8.5 mils, 1/2" dia.
Article No: 10397
Formed Rod, 7.5 mils, 1/4" dia.
Article No: 10321
Formed Rod, 4.4 mils, 3/8" dia.
Article No: 10347
Formed Rod, 7.5 mils, 1/2" dia.
Article No: 10395
Formed Rod, 1.0 mils, 1/2" dia.
Article No: 10375
Formed Rod, 1.4 mils, 1/2" dia.
Article No: 10377
Formed Rod, 8.0 mils, 1/2" dia.
Article No: 10396
Formed Rod, 1.4 mils, 1/4" dia.
Article No: 10296
Formed Rod, 1.0 mils, 1/4" dia.
Article No: 10294
Formed Rod, 1.2 mils, 1/4" dia.
Article No: 10295
Formed Rod, 1.8 mils, 1/4" dia.
Article No: 10298
Formed Rod, 0.4 mils, 3/8" dia.
Article No: 10329
Formed Rod, 0.6 mils, 1/2" dia.
Article No: 10371
Formed Rod, 0.8 mils, 1/4" dia.
Article No: 10292
Formed Rod, 0.9 mils, 5/8" dia.
Article No: 10407
Formed Rod, 1.6 mils, 10mm dia.
Article No: 10363
Formed Rod, 0.9 mils, 1/4" dia.
Article No: 10293
Formed Rod, 8.0 mils, 3/8" dia.
Article No: 10353
Formed Rod, 5.0 mils, 3/8" dia.
Article No: 10350
Formed Rod, 0.3 mils, 1/2" dia.
Article No: 10368
Formed Rod, 4.8 mils, 1/4" dia.
Article No: 10314
Formed Rod, 0.2 mils, 10mm dia.
Article No: 10355
Formed Rod, 5.0 mils, 1/2" dia.
Article No: 10390
Formed Rod, 3.2 mils, 3/8" dia.
Article No: 10343
Formed Rod, 8.0 mils, 1/4" dia.
Article No: 10322
Formed Rod, 2.4 mils, 3/8" dia.
Article No: 10340
Formed Rod, 4.0 mils, 3/8" dia.
Article No: 10345
Formed Rod, 0.7 mils, 10mm dia.
Article No: 10359
Formed Rod, 0.8 mils, 5/8" dia.
Article No: 10406
Formed Rod, 2.4 mils, 1/4" dia.
Article No: 10301
Formed Rod, 2.6 mils, 1/4" dia.
Article No: 10302
Formed Rod, 4.5 mils, 1/4" dia.
Article No: 10312
Formed Rod, 1.0 mils, 10mm dia.
Article No: 10361
Formed Rod, 1.6 mils, 1/2" dia.
Article No: 10379
Formed Rod, 5.0 mils, 5/8" dia.
Article No: 10415
Formed Rod, 0.5 mils, 1/4" dia.
Article No: 10289
Formed Rod, 0.9 mils, 1/2" dia.
Article No: 10374
Formed Rod, 1.6 mils, 3/8" dia.
Article No: 10336
Formed Rod, 2.8 mils, 1/2" dia.
Article No: 10384
Formed Rod, 1.2 mils, 10mm dia.
Article No: 10362
Formed Rod, 4.2 mils, 1/4" dia.
Article No: 10310
Formed Rod, 1.0 mils, 5/8" dia.
Article No: 10408
Formed Rod, 4.5 mils, 3/8" dia.
Article No: 10348
Formed Rod, 3.6 mils, 3/8" dia.
Article No: 10344
Formed Rod, 0.6 mils, 3/8" dia.
Article No: 10331
Formed Rod, 6.5 mils, 1/2" dia.
Article No: 10393
Formed Rod, 1.5 mils, 1/2" dia.
Article No: 10378
Formed Rod, 4.0 mils, 10mm dia.
Article No: 10365
Formed Rod, 4.8 mils, 3/8" dia.
Article No: 10349
Formed Rod, 4.4 mils, 1/4" dia.
Article No: 10311
Formed Rod, 6.0 mils, 10mm dia.
Article No: 10366
Formed Rod, 6.5 mils, 1/4" dia.
Article No: 10319
Formed Rod, 8.5 mils, 1/4" dia.
Article No: 10323
Formed Rod, 9.5 mils, 1/2" dia.
Article No: 10399
Formed Rod, 0.4 mils, 1/2" dia.
Article No: 10369
Formed Rod, 4.0 mils, 1/4" dia.
Article No: 10309
Formed Rod, 2.2 mils, 1/4" dia.
Article No: 10300
Formed Rod, 5.0 mils, 1/4" dia.
Article No: 10316
Formed Rod, 6.0 mils, 3/8" dia.
Article No: 10351
Formed Rod, 2.0 mils, 5/8" dia.
Article No: 10412
Formed Rod, 9.0 mils, 1/2" dia.
Article No: 10398
Formed Rod, 3.0 mils, 5/8" dia.
Article No: 10413
Formed Rod, 0.8 mils, 1/2" dia.
Article No: 10373
Formed Rod, 9.5 mils, 5/8" dia.
Article No: 10416
Formed Rod, 0.6 mils, 5/8" dia.
Article No: 10404
Formed Rod, 7.0 mils, 1/2" dia.
Article No: 10394
Formed Rod, 1.6 mils, 5/8" dia.
Article No: 10411
Formed Rod, 1.8 mils, 3/8" dia.
Article No: 10337
Formed Rod, 3.6 mils, 1/4" dia.
Article No: 10307
Formed Rod, 1.6 mils, 1/4" dia.
Article No: 10297
Formed Rod, 4.5 mils, 1/2" dia.
Article No: 10389
Formed Rod, 3.2 mils, 1/4" dia.
Article No: 10305
Formed Rod, 1.2 mils, 5/8" dia.
Article No: 10409
Formed Rod, 0.8 mils, 10mm dia.
Article No: 10360
Formed Rod, 0.3 mils, 5/8" dia.
Article No: 10401
Formed Rod, 0.2 mils, 5/8" dia.
Article No: 10400
Formed Rod, 0.4 mils, 5/8" dia.
Article No: 10402
Formed Rod, 4.0 mils, 5/8" dia.
Article No: 10414
Formed Rod, 5.5 mils, 1/4" dia.
Article No: 10317
Formed Rod, 2.0 mils, 1/4" dia.
Article No: 10299
Formed Rod, 0.5 mils, 10mm dia.
Article No: 10357
Formed Rod, 0.7 mils, 5/8" dia.
Article No: 10405
