Cross Hatch Kit, single blade
Cross-Cut Kit 11, 1-edge 1.5 mm
Adhesion Tester single blade 1.5mm spacing - ASTM D3359
- 11 Teeth
- 1.5 mm Cutter Spacing
- In accordance with ASTM methods
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
This test method specifies a procedure for assessing the resistance of paints and coatings to separation from substrates when a rightangle lattice pattern is cut into the coating, penetrating through to the substrate.
The method may be used for a quick pass/fail test. When applied to a multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.
- Blades made from hardened steel alloy for long life
- Pivoting head blade holder for easy alignment onto the coating surface
- Test kit comes with all the accessories necessary to perform cross-hatch test
| Technical Properties | |
|---|---|
| Material | |
| Technical Specifications | |
| Standard/Cutter Spacing | |
| Standard | |
| No. of Cutting Edges | |
| No. of Teeth | |
| Cutter Spacing | |
| Cutter Spacing | |
| Hex Wrench included | |
consentmanager.netHex wrench for changing blades
Magnifier (5136)
Cleaning brush (5135)
One roll of adhesive tape
Manual
Carrying case
Short Instructions
- 199022076_E_1103.pdf
199022076_E_1103.pdf
Brochure
- Technical_Data_Sheet_5123_Cross_Hatch_1_Edge_E_20241030.pdf
Technical_Data_Sheet_5123_Cross_Hatch_1_Edge_E_20241030.pdf
Cross-Cut Blade 11, 1-edge 1.5 mm
Article No: 3424
Cross-Cut Blade 6, 1-edge 1 mm
Article No: 3425
Cross-Cut Blade 6, 1-edge 2 mm
Article No: 3426
Cross-Cut Blade 11, 1-edge 1 mm
Article No: 3429
Cross-Cut Blade 6, 1-edge 3 mm
Article No: 5129
Brush
Article No: 5135
Magnifier
Article No: 5136
Adhesive Tape for DIN/ISO
Article No: 5137
Adhesive Tape for ASTM D3359
Article No: 8660
Cross Hatch Handle, Alu
Aluminum Cross Hatch Handle
Article No: 12614
Adhesion Tape 90 yds x 1"- ASTM D3359
Article No: 15513
Cross-Cut Kit 6, 1-edge 2 mm, ASTM
Adhesion Tester single blade 2mm spacing - ASTM D3359
Article No: 5124
Cross-Cut Kit 11, 1-edge 1 mm
Adhesion Tester single blade 1mm spacing - ASTM D3359
Article No: 5123
Cross-Cut Kit 6, 1-edge 2 mm
Adhesion Tester single blade 2mm spacing - ISO 2409
Article No: 5126
Cross-Cut Kit 6, 1-edge 3 mm
Adhesion Tester single blade 3mm spacing - ISO 2409
Article No: 5128
Cross-Cut Kit 6, 1-edge 1 mm
Adhesion Tester single blade 1mm spacing - ISO 2409
Article No: 5125
