Media is unavailable.

Dry film thickness gauge with fixed and cable sensor

Art. No.: 3674

byko-test 4600
Time saving and easy to operate non-destructive film thickness gauge

Compact design for easy handling
One button operation for simple operation
Automatically flipping display
Automatic substrate recognition to minimize measurement error
Strong, wear resistant ruby sensor tip
Acoustic signal for measurement confirmation

Select your Model

Coating Thickness Gauges

€795.00

QTY

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

Capable of over 100 measurements per minute, the byko-test 4600 can handle every task while providing accurate and repeatable measurements. The byko-test 4600 is easy to operate with just one button and provides immediate evaluation of the readings by statistical analyis. With a high trueness over the entire range and temperature compensation directly in the probe, this film thickness gauge can improve the quality and speed of your workflow significantly.

Thickness Measurement
Measuring Range Mils / µm	0 - 47 mil 0 - 1200 µm
Probe	Dual Fe/NFe 1.2 mm
Measuring Range	0 - 47 mil
Measuring Range	0 - 1200 µm
Accuracy	Fe: ±1 µm + 2% of measured value Fe: ±0.04 mil + 2% of measured value NFe: 2 µm + 2% of measured value NFe: ±0.08 mil + 2% of measured value
Measuring area, min.	0.55 in ø
Measuring area, min.	14 mm ø
Minimum Curvature	Fe: 0.39 in ; NFe: 1.96 in
Minimum Curvature	Fe 10 mm; NFe 50 mm
Minimum substrate thickness	Fe: 3.9 mil ; NFe: 1.96 mil
Minimum substrate thickness	Fe: 100 µm; NFe: 50 µm
Resolution	Adjustable: 0,1 µm (0,1 mils) or 0,01 µm (0,01 mils)
General
Memory	no
Interface	USB
Power supply	2 x AA Batteries 1.5 V Alkali, or rechargeable AA 1.2 V
Weight	0.1 kg
Weight	0.22 lb
Operating temperature	0 - 50 °C
Storing temperature	-20 - 70 °C
Operating temperature	-4 - 158 °F
Storing temperature	-4 - 158 °F
Relative humidity	10 to 90%, non condensing
Dimensions: L x W x H	13.5 x 6.3 x 4.3 cm
Dimensions: L x W x H	5.3 x 2.5 x 1.7 in

ASTM	B499 D1186 D1400 D7091
BS	3900-C5 5411-3 5411-11
DIN	50981 50984
ISO	2178 2360 2808 19840

byko-test 4600
Fe and NFe reference plate
Calibration certificate
2 Mignon batteries 1,5 V (AA) alkaline
Plastic case for transport and storage

Film thickness

For all requirements associated with a coating, there is an optimal layer thickness to ensure good flow and leveling, gloss, optimal color uniformity and opacity as well as good protection against environmental influences and corrosion. If the layer thickness is too high, mechanical-technological properties such as mandrel bending tests, stone impact tests and ball impact tests deteriorate, and the cost-effectiveness of the painting process also decreases. For this reason, layer thicknesses are worked out and specified by the paint supplier and quality assurance. These must be regularly checked and documented.