PosiTector 6000 High-Range Probes

Name: Probe FNGS, High-Range Cable, 0-2.5”
SKU: 000000000000014997
Price: 1316 EUR

Art. No.: 14997

Probe FNGS, High-Range Cable, 0-2.5”

The Positector 6000 High-Range Probes are ideal for thick protective coatings, such as epoxy, rubber, concrete liners, intumescent fireproofing, ship hull coatings (FNGS) and more.

Select your Model

Thickness Gauges

€1,316.00

QTY

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

Models include the FTS, FTRS, FKS, NKS and FNTS
The FTRS has a 90° angle
The FJS and FLS are ideal for steel
The FLS and FNGS have a braided stainless steel cable - kink-proof, wear and cut resistant are compatible with PosiTector bodies with serial numbers greater than 700,000 and the new PosiTector SmartLink.
FJS Probe is lightweight with an ergonomic design - 66% smaller than comparable probes. Its electro-magnetic probe is less susceptible to the effects of substrate roughness, curvature, material, and alloy.
The FLS Probe measures up to 38 mm (1.5 inches) and includes hard shell case and 19 mm (750 mil) shim
The FNGS Probe measures very thick coatings on ALL metals, non-conductive coatings on both ferrous and non-ferrous metal substrates. It measures up to 63.5 mm (2.5 inches), has a long-lasting, low wear probe face to facilitate scanning of large surfaces, and includes a handle for easy one-handed operation, a set of traceable coating thickness standards, instruction card.

Technical Data Chart

Data

Probe Model	FTS	FTRS	FNTS	FKS	NKS	FJS	FLS	FNGS
Substrates:	Ferrous	Ferrous	Ferrous / Non-ferrous	Ferrous	Non-Ferrous	Ferrous	Ferrous	Ferrous / Non-Ferrous
Range:	0 - 250 mils (0 - 6 mm / 0 - 6000 µm)			0 - 500 mils (0 - 13 mm)		0 - 1.0 in. (0 - 25 mm)	0 - 1.5 in. (0 - 38 mm)	0 - 2.5 in. (0 - 63.5 mm)
Accuracy:	±(0.5 mils + 1%) 0 - 100 mils ±(0.5 mils + 3%) > 100 mils ±(0.01 mm + 1%) 0 - 25 mm ±(0.01 mm + 3%) > 2.5 mm			±(1 mils + 3%) 0 - 500 mils ±(0.02 mm + 3%) 0 - 13 mm		±(0.01 mils + 3%) ±(0.2 mm + 3%)	±(0.01 in. + 3%) ±(0.2 mm + 3%)	±(0.01 in. + 3%) ±(0.2 mm + 3%)
Calibration Standards:	P1			P5		P2	P8
Minimum Surface Area:	-						3.23 x 3.25 in. (83 x 83 mm)	10 x 10 in. (254 x 254)
Minimum Substrate Thickness:	-						0.1 in. (2.5 mm)	0.2 in. (5 mm)
Weight:	-							0.8 lb. (0.4 kg)
Accuracies are stated as a fixed value plus a percentage of the gage's actual reading