Wet Film Thickness Gauges with wheels (mils)
Inmont Gage S, 0-1 mils, w/ Cert
- Certified Gage
- Full Scale Calibration Range: 0 -1 mil
- Recommended: 0.2 - 0.8 mil
- Resolution: 0.05 mil
- Original Interchemical design for general use
- Scale is stamped on the outside of the metal wheel; no rotating scale is used
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
The Interchemical Thickness Gage, also known as IC or Inmont gage, has long been the standard for measuring wet film thickness in the coatings industry (U.S.Patent No. 3,128,558). It is ideal for thin film applications and used for measuring wet ink film at the press.
BYK-Gardner offers three basic models in various ranges: Model S - general use, Model R - rotating scale, Model L - Low inertia with rotating scale. All models have an accuracy of +/- 0.0001 in (2.5 μm) or 2.5% full scale, whichever is greater.
- Very accurate for thin film applications
- Can be used with moving surfaces
- Easy to clean
- Stainless steel construction for long life
- Metric or mils version available
- Compliant with ASTM D1212 and ISO 2808 methods
- Gage holder optionally
| Thickness Measurement | |
|---|---|
| Measuring Range Mils / µm | |
| Technical Specifications | |
| Full Scale Calibration Range Mils/ µm | |
| General | |
| Weight | |
| Weight | |
| Dimensions | |
| Dimensions | |
| ASTM | D1212 |
|---|---|
| ISO | 2808 |
Brochure
- Wet-Film-Thickness-Gauges-with-Wheels-mils_20250226.pdf
Wet-Film-Thickness-Gauges-with-Wheels-mils_20250226.pdf
The gage consists of an eccentric inner wheel, supported by two larger outer concentric wheels. At a specific point, the inner wheel touches and picks up wet film when the gage is rolled on the coated surface. This critical clearance may be read on a rotating scale.
The gages may be held between the thumb and forefinger to take a reading, or it may be inserted into the gage holder. This holder is widely used to measure coatings safely on moving surfaces such as high-speed press rollers. It can also be used on stationary, flat, or curved surfaces since the holder makes it easier to exert a steady, even force on the gage.
Holder for Inmont Gage
Article No: 6580
Inmont Gage Case
Article No: 14016
Inmont Gage R, 0-1 mils, w/ Cert
Article No: 16959
Inmont Gage S, 0-4 mils, w/ Cert
Article No: 16962
Inmont Gage S, 0-2 mils, w/ Cert
Article No: 16961
Inmont Gage L, 0-2 mil, w/ Cert
Article No: 16958
Inmont Gage R, 10-30 mils, w/ Cert
Article No: 16514
Inmont Gage R, 0-2 mils, w/ Cert
Article No: 16511
Inmont Gage L, 0-1 mil, w/ Cert
Article No: 16500
Inmont Gage R, 2-12 mils, w/ Cert
Article No: 16513
Inmont Gage R, 0-4 mils, w/ Cert
Article No: 16512
Inmont Gage L, 0-1 mil
Wet Film Thickness Gauge - thin coatings, rotating scale
Article No: 6500
Inmont Gage R, 0-1 mils
Wet Film Thickness Gauge with rotating scale
Article No: 6959
Inmont Gage S, 10-30 mils
Wet Film Thickness Gauge with wheels - original design
Article No: 6964
Inmont Gage S, 2-12 mils
Wet Film Thickness Gauge with wheels - original design
Article No: 6963
Inmont Gage R, 0-2 mils
Wet Film Thickness Gauge with rotating scale
Article No: 6511
Inmont Gage S, 0-4 mils
Wet Film Thickness Gauge with wheels - original design
Article No: 6962
Inmont Gage S, 0-2 mils
Wet Film Thickness Gauge with wheels - original design
Article No: 6961
Inmont Gage R, 10-30 mils
Wet Film Thickness Gauge with rotating scale
Article No: 6514
Inmont Gage L, 0-2 mil
Wet Film Thickness Gauge - thin coatings, rotating scale
Article No: 6958
Inmont Gage S, 0-1 mils
Wet Film Thickness Gauge with wheels - original design
Article No: 6960
Inmont Gage R, 2-12 mils
Wet Film Thickness Gauge with rotating scale
Article No: 6513
Inmont Gage R, 0-4 mils
Wet Film Thickness Gauge with rotating scale
Article No: 6512
