Surface Cleanliness Tape Test

Assessment of Surface Cleanliness

Art. No.: 12704

Cleanliness Test Tape 1" X 72 Yds

  • The cleanliness test tape is self-adhering and virtually colorless
  • Meets ISO 8502-3
  • Pressure sensitive transparent tape
  • Adhesion strength of at least 190 N/m

Select your Model

  • The Assessment of Surface Cleanliness is a dust on steel assessment tape to test for cleanliness
  • This tape is used to test for dust on blast cleaned steel surfaces which may reduce the adhesion of applied coatings and by absorbing moisture and can promote the corrosion of the blast cleaned steel
  • Test needs to be performed with an Illuminated Magnifier (not included - see Article No. 11979 in accessories)

Technical Data Chart
Data
ClassDescription of dust particles 
0Particles not visible under X 10 magnification
1Particles visible under X 10 magnification but not with normal or corrected vision (particles < 2 mils in diameter).
2Particles just visible with normal or corrected vision (particles 2 mils to 40 mils in diameter)
3Particles clearly visible with normal or corrected vision (particles up to 40 mils).
4Particles between 40 mils to 100 mils
5Particles larger than 100 mils
Pictorial references corresponding to dust quantity ratings 1, 2, 3, 4 and 5. NOTE: The use of intermediate half-steps is permissible if required to give a more detailed report. Report any overall discoloration as quantity rating 5, size class 1.
Cleanliness Test Tape 1" X 72 Yds

Manuals