8400K Digital Optical Micrometer

Art. No.: 12166

8400K Optical Micrometer Kit

8400K Optical Depth Micrometer Kit

Select your Model

Laboratory Supplies

€3,926.00

QTY

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

Hand-held microscope and optical depth gauge
Uses a manual focus method to measure surface indentations and protrusions
Primarily used for measuring damage on critical aircraft surfaces to determine severity, repairability, and airworthiness
For use on flat and curved surfaces
Inspect metals, natural and synthetic polymers, composites, painted or chemically treated finishes, fibers, and transparent materials
The Digital Depth Optical Micrometer measures:
Scratches, corrosion pits, dings, impact dents, and other surface damage
The depth of engraving, etching and other part markings
Transparencies for overall thickness, and the depth and thickness of crazing and fractures, and imbedded bubbles or seeds
The height of burrs, chips and small surface protrusions
Can verify dimensions for compliance to drawings or other specifications
It also includes 3 interchangeable bases, 2 black and 1 clear
- A 3-Leg tripod base used for most flat and simple curved surfaces.
- A 4-Leg base used on broad convex and concave surfaces.
- A new and improved acrylic V-block base for leading edges, small diameters, outside angles, and flat surfaces next to an edge.
The Optical Micrometer can easily be connected to a laptop or tablet by swapping the eyepiece with a microscope camera. Annotations of the depth and other notes can easily be made to the images to produce detailed inspection reports. The image quality is excellent; the camera captures every detail and records exactly what would be seen by looking through the eyepiece (Included in 15500 kit only).

Technical Data Chart

Data

Part No.:	12166	15458	15500
Description:	8400K	8400K Certified Kit	8400K All-in-One Kit
Dimensions:	14" x 12" x 6"	14" x 12" x 6"	22" x 18" x 12"
Kit Weight:	7 lbs	7 lbs	32 lbs
Micrometer Size:	9"H x 3" Diameter Base, 1.5 lbs

Magnification	Accuracy	Max Depth	Field of View
40X	±0.001"	1.150"	0.18" Diameter
80X	±0.001"	1.150"	0.10" Diameter
100X	±0.001"	0.250"	0.07" Diameter
200X	±0.001"	0.250"	0.04" Diameter
Diameter Field of View:	10X objective (with 20X / 10X eyepieces): .040" / .070" wide 4X objective (with 20X / 10X eyepieces): .110" / .175" wide
Approximate Magnification Power:	40X & 80X (with 4X objective) 100X, 200X (with 10X objective)
Use 10X reticule eyepiece with the 10X objective lens only. Scale range of eyepiece is .040 inches with .002" accuracy and .001" resolution (also 1.00mm, with .02mm accuracy and .01mm resolution). The working distance for the 10X lens is .250", for 4x lens, 1.275" above surface. The "working distance" refers to how far the objective lens is from a surface when in focus. This means that .250" and 1.275" are the maximum scratch depths that could be observed, in theory, without the lens "bumping into" the surface. The 4X objective provides the most clearance, and is thus used for larger features and for transparencies, where the near and far sides can be focused upon without lens interference. The 4X objective lens is ideal for transparencies. The wide field of view allows observation of more and larger features, and the long working distance prevents the lens from contacting surface - even when focusing on the far side of a thick transparency (up to 1.9"). Accuracy is not compromised by using the 4X objective.

Manuals

8400K-Digital-Optical-Micrometer-Manual.pdf8400K-Digital-Optical-Micrometer-Manual.pdf

Basic Principle
The Micrometer uses focus to measure the distance between two points on different surfaces (at different heights). Features at the same depth will appear in focus and features above or below will be blurry. Turning the Focus Adjust moves the focus up and down.

Procedure

Fine position the Micrometer so the edge of the recessed area, like a scratch, is in the center of the field of view.
Focus on the top surface directly next to the scratch
When the surface area is in sharpest focus, press the ZERO/ABS button on the Digital Display to set a starting point for the measurement.
Without moving the Micrometer, focus down to the bottom of the damage. To find the true lowest point, focus down passed what seems to be the last area in focus until nothing else appears in focus below, then come back up to the first area that comes into sharp focus.
Record the measurement from the Digital Display.
Verify the measurement by refocusing up to the top surface. The Digital Display should show "0.0000“ again.

The entire measurement cycle should be completed by the same person. When switching users, always reset zero or the result may be inaccurate. The Micrometer does not have prismatic correction, the view through the eyepiece is inverted.

Calibration Procedure - Recommended Yearly

Equipment needed: 4x Rectangular Gauge Block (0.005”-0.200”), Grade 0, ASME B89.1.9, calibrated and traceable to NIST. Recommend Sizes: 0.005”, 0.015”, 0.0625”, 0.100”

Wring 0.005” and 0.100” gage blocks by sliding one block perpendicularly across the top of the other, then rotate lengthwise and slide to create a step with the 0.100” gage block on the bottom.
Place micrometer over the step and position so approximately one‐half of the field of view is on the upper block.
Focus on the top surface of the upper block. Zero “0.0000” digital display.
Focus on lower block. Read display; if equipment is functioning properly the display will show the exact thickness of upper block.
Repeat steps 1-5, using the 0.015” and 0.0625” as the upper block.

8400K Certified Optical Micrometer Kit

Article No: 15458

Price: €4,269.00

8400K Digital Optical Micrometer

8400K Optical Micrometer Kit

Manuals

Standards

Procedure

Knowledge

8400K Certified Optical Micrometer Kit