The Hull Roughness Gauge measures the AHR value (Average Hull Roughness) of sea going vessels.

Test wear, scrubbability, washability, breakaway & Kinetic frictions.

Adjustable micrometers are film applicators ergonomically designed to facilitate fast, accurate draw downs.

The most popular type of viscosity measuring instrument as a national and international standard.

The tester is a motor driven instrument for moving a weighted test strip over a printed specimen through an arc.

Paint Adhesion Test Kit that contains the tools & materials needed for conducting adhesion tests on paints.

An ergonomic test kit to assess the quantity and size of dust particles on blast cleaned surfaces prior to painting.

Quickly and accurately determine the weight per gl, & specific gravity of paints, lacquer, pastes, semi-pastes, & other liquid materials.

A portable kit which will allow you to make weight per gallon/density measurement on the job, in the field or warehouse.

Ultrasonic Thickness Gauge that measures the wall thickness of materials such as steel, plastic and more.

New redesigned coating thickness gages also for ALL metal substrates.

Portable surface resistivity meter that provides useful measurement information about the state of a concrete structure.

Compact, portable, extremely durable reference discs for surface profile determinations.

Developed for ease of use and to prevent outside and cross contamination.

The ReliaPull® Adhesion Test Equipment was built to help reduce the human variation imposed on the results of Tape Tests performed manually.

This method covers a procedure suitable for establishing acceptability of intercoat & surface adhesion of an organic coating system immersed in water.

Spring Loaded Roller Apparatus for Cleanliness Tape Test ISO 8502-3 as mentioned in Procedure 6.2b.

Instruments with radio transmitters for electrically non-conducting coatings on non-ferrous metals and other materials.

Direct measurement of total coating thickness, and thickness of individual coats of paint.

Certified Coating Thickness Standards, NIST Calibration Standards, and Measured Calibration Foils.

Quadracycle Instrument which measures & records drying times of all types of coatings, adhesives, etc.

Designed to draw down sample coatings with a high degree of reproducibility.

Novo-Gloss Glossmeters - RF Single, Dual and Trigloss give maximum accuracy and resolution in all gloss applications.

Lets your eyes travel where you can't. A versatile diagnostic tool that can inspect areas as small as 4mm.

The NEW Rhopoint IQ can measure all aspects of reflective appearance quality.

Hand held unit for quality control, inspection, field use, electronics, metal analysis, clinical observation, cloth/ paper & plant studies.

The TQC Gloss meter allows the user to measure fast and simple accurate gloss levels on any flat surface.

Total appearance control. It measures color and gloss all in one unit.

Effective method to test coatings for their hardness and resistance to scratches and wear.

Test based on the principle that amplitude of oscillation of a pendulum touching a surface decreases more rapidly the softer the surface.

Pencil scratch hardness tester that features self aligning and positioning.

Uused to indicate the fineness of grind or the presence of coarse particles or agglomerates in a dispersion.

Large variety of wire wound applicator rods that we currently carry. Click here to go our Wire Wound Rods Order Chart Page.

Solid steel rod, resembles a wire-wound rod, provides precise metered coatings on film, tin, rubber, plastics, glass, textiles & more.

Pull-Off adhesion tester, now digital, measures adhesion of coatings to metal, wood, concrete & other substrates.

New Dual guide Crosscut Tester now easily achieves spacing up to 6mm, which is required for some bridge and industrial applications.

Programmable Digital Viscometers with full color touch screen display.

The all new Pentagon Mandrel Bend Test Apparatus is now available for the evaluation of coating systems.

The Concrete Encounter CME4 is a non-destructive moistrue detector.

Extendable LED flashlight with magnetic ends and inspection mirror.

Features such as back-lit display, user adjustable alarm, and HOLD feature that make even the most demanding inspection simple.

Non-destructive moisture measurement of wood, plaster, drywall, block, brick, roofing and most materials found in the building arena.

Accuracy & measurement speed with numerous innovative features creating a new class leader in surface inspection.

Portable surface roughness tester comes with touch-panel LCD & built-in printer and conforms to JIS, ISO, DIN, and ANSI standards.

Roughness Comparison Specimens are used for checking roughness of turned, milled, ground, reamed, polished or lapped parts during machining.

Measures uncured powder coatings using ultrasonic technology to auto calculate and display a predicted cured thickness.

Digital pocket measuring tool that is a fast yet accurate way to check thickness and simple dimensions with ease.

Measure wet film thickness of paints, enamels, lacquers, adhesives & many other wet coatings.

Standard practice for measurement of wet film thickness of organic coatings by notched gauges.

The gauge makes it easy for anyone to obtain fast, highly accurate measurement on flat surfaces.

Surface profile gauge, a modern, fast method of measuring surface profiles on blasted surfaces!

Wireless Inspection Camera great for water restoration, HVAC & refrigeration, electrical inspection, automotive, pest control, etc.

Pneumatic Adhesion Tensile Testing Instruments Quantum Series is a line of portable adhesion testers.

Lets you measure the vertical depth of surface features, usually to evaluate the severity of mechanical damage.

The HATE testers offer the coating industry new capabilities, from the lab technician & paint chemist to the field inspector & corrosion engineer.

The ZSF 2196 is a scratching tool for carrying out scribe marks through coatings on metal substrates.

Stearns combines its renowned solid technology with the innovation of regulated voltage to fashion quality instruments that are the top of the line in their field — the Model 14/20.

The SPG Surface Profile Gage measures and records peak to valley surface profile heights.

The Positector RTR is a Replica Tape Reader that is simple, durable and accurate.

An extremely versatile tool for measuring and recording all climate parameters required for treating surfaces.

A handy new stainless steel tool template which allows you to use all the popular crosscut spacing's, 1, 1.5, 2, and 3mm, in one unit.

This model has received wide acceptance in the corrosion control & industrial painting industry as a device for locating holidays in thin protective films.

Low voltage Pinhole Detector - Detects holidays, pinholes and other discontinuities on metal and concrete substrates.

Adjustable for such surfaces coated with a high electrical resistant material & the surface beneath the coating is electrically conductive.

The Model M/1S is a stick type low voltage wet sponge holiday detector with an ergonomic design.

The PosiTest® AIR Leak Tester detects air leakage in building envelopes and air barrier systems.

The RF-IT and CE-IT test above and below ground pipeline insulators.

This instrument is used for non-destructive measurement of the ferrite content.

The PosiTest DFT II Coating thickness gauge for Ferrous and All Metal Coatings.

This instrument can wirelessly connect your PosiTector probes to your smart device.

The PosiTector SHD is a shore hardness durometer that is simple, durable and versatile.

Measures/records climatic conditions - relative humidity, air-surface-dew point temp & differences between surface & dew point temps.

The SmarTest is a wireless coating thickness measurement sensor with app.

Certified coating thickness standards are ideal for verifying the accuracy and operation of coating thickness gages.

Measure the frictional resistance between a rubber slider mounted on the end of a pendulum arm and the test surface.

The Micro-Gloss III Series meters combine the highest accuracy, ease-of-use and multiple functionality.

Original and SilverSchmidt Test Hammers that uses indirect means of obtaining relative value for compressive strength of finished concrete.

The digital pocket microscopes deliver crisp, clear color images with a resolution up to 1280 x 1024 pixels.

Small, portable, inexpensive and easy microscope that can be connected directly to a PC. Supplied with software for immediate inspection and measuring.

The TQC Concrete Moisture Meter is a non-destructive moisture meter for concrete.

The Karsten Tube is a water penetration tester used in a rapid testing procedure with regard to water penetration in building materials.

The BD Series multi-purpose moisture meters are the perfect tools for home inspectors, contractors or flooring installers.

The Calcium Chloride Moisture Test Kit measures the quantity of moisture passing through on and below grade concrete floors.

A hand-held, digital, pin-type resistance moisture meter designed to take precise measurements of moisture content in wood and other building products.

Complete moisture & humidity test kit for pre & post installation testing of concrete slabs & flooring.

The Positest AT Verifier is ideal for checking the accuracy and operation of adhesion testers.

Auto pull-off testers unmatched with ease of operation and a unique capability to store a complete record of the test.

More responsive than a glass electrode, these pencils are used for determining the pH of any surface.

Flat surface electrode allows "on the spot" measurements of liquid, semi-solid, or solid samples.

Q-Panel brand test panels minimize metal variability in coatings tests.

15th Edition of the venerable Gardner-Sward Handbook, the latest information on significant paint and coating test methods and technology.

SSPC - Vis 2 - Standard Method for evaluating degree of rusting on painted steel surfaces.

This instrument provides a means of achieving an optimum finish - time after time.

Conveyor ground test with five steps which informs you whether items to be painted are sufficiently grounded.

A combination gage that can be equipped with two different tips, one for surface roughness and another for coating thickness.

Test for lead, mercury, cadmium, chrome, nickel, lead in liquids, lead in soils, or paint.

Industry standard in determining absolute viscosity of all types of liquids with viscosities as high as 320 million centipoise.

This Washability Tester is used to test the resistence of paint, varnish or coatings to scratching, wearing, and color loss due to wet or dry abrasion.

Humidity, wet bulb, dew point, air temp plus external probe temp measurements.

Similar in design to the original Interchemical gages with the distinction of having dual scale in mils & microns with a center eccentric disk. New handle available.

The Profometer Corrosion is the most versatile corrosion analysis solution in the market based on the half-cell method.

The most versatile ultrasonic pulse velocity test equipment for concrete.

Unique real-time rebar-visualization allowing contractor to actually “see” the location of rebar beneath the concrete surface.

Pundit PL-200PE uses pulse echo technology to extend ultrasonic application to objects where access is restricted to a single side.

The only tester used in establishing ASTM Designation D 5264 Standard Test Method for abrasion resistance of printed materials.

Non-destructive coating thickness measurement according to the magnetic induction method and/or the eddy current method.

The Spectro2Guide is a total appearance control instrument, tests both color and gloss in one unit.

The Adhesion Test Analyzer (ATA) takes the guess work out of rating the classification of your adhesion test results.

A reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way.