+1 (954) 946-9454

Bresle Salt Contamination Detection Kit

Article No. 10847

Bresle Patch Salt Kit with Horiba Meter

  • Bresle Patch Salt Kit
  • LAQUAtwin Conductivity/Temperature/ TDS Meter

Select your model

$679.00 excl. taxes & shipping cost

Features

The Bresle Salt Contamination Detection Kit is a conductometric determination of soluble salt contamination. It is essential that the level of contaminants on a surface is measured prior to coating in order to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. This is why the Bresle Salt Contamination Detection Kit is so important.

  • Reliable and accurate
  • It is easy to use and portable
  • In accordance with ISO 8502-6 and ISO/DIS 8502-9
  • Can prevent costly repair and need for recoating

Procedure

Many inspectors have to test surfaces in accordance with ISO 8502-6 and ISO/DIS 8502-9, which specify tests using the Bresle Patch as the method of extracting the soluble salts from the test surfaces.

  1. The Bresle Patch is adhered to the test surface and distilled water is pumped into the patch using a syringe.
  2. The water is pumped between the patch and the substrate, which causes the soluble salts on the test surface to be dissolved into the water.

Delivery Content

(1) Box of 25 Bresle Patches, (1) Disp. Beaker 30ML Grad., (1) Syringe/NDL 10cc 21G 1", (1) Laquatwin Conductivity Meter, (1) Bottle 500ML Distilled Water, (1) Pair of Gloves

Join our Email List. subscribe
CANCEL