+1 (954) 946-9454

MiniTest 70 Coating Thickness Gauges with SIDSP®

Article No. 11029

MiniTest 70 Dry Film Thickness Gauge, F

  • MiniTest 70 FN Model
  • FN has a built-in dual sensor for measuring non-magnetic coatings applied on steel and insulating coatings on non-ferrous metals, (0 to 100 mils / 0 to 2500µm).
  • It incorporates a dual sensor for automatic identification of the substrate material.
  • The gauge upon contact with the surface automatically switches to the suitable measuring principle based on your application: magnetic-induction or eddy currents.

Select your model

$1,085.00 excl. taxes & shipping cost

Features

  • Compact, pocket sized coating thickness gauges are designed for quick and easy non-destructive coating thickness measurement
  • Simple 4-button operation
  • Clear display and built-in statistics displaying the number of readings taken
  • The minimum, maximum, mean values and standard deviation make them ideal for on-site applications
  • With new simplified operation, no special training is required to operate these gauges
  • An audible signal confirms reading acquisition
  • Powered by standard single AA battery and when the battery gets low, a BAT symbol appears to indicate that the battery needs to be changed.
  • Built-in sensor
  • Proven measuring methods
  • Statistics function

Technical Attributes

  • Data
    Part No.:1102811029
    Measuring Range:0 - 3mm/120 mils F-range0 - 3mm/120 mils
    N-range 0 - 2.5mm/100 mils
    Measuring Principles:Magnetic inductionMagnetic induction/eddy currents
    Signal Processing:SIDSP® sensor-integrated digital 32-Bit-signal processing
    Accuracy †:±(.06 mils +2% of the reading) following two point setup
    ±(.06 mils + 3% of the reading) following one point setup
    Repeatability †:±(0.04 mils + 1% of the reading)
    Low Range Resolution:.05μm / .02 mils
    Min Curvature - Convex:5 mm/ 0.20”
    Min Curvature - Concave:40 mm/ 1.60”
    Min Substrate Thickness:F: 0.5 mm/ 0.02Æ N: 0.04 mm/ 0.0016”
    Units of Measure:μm/ mils (switchable)
    Statistics:N, AVG, S, Min, Max
    Calibration Modes:One point, two point
    Operating Temperature:-10°C - +60°C / 14°F - 140°F
    Storage Temperature:-20°C - +70°C / -4°F - 158°F
    Power Supply:1 x AA Alkaline or rechargeable battery
    Norms and Standards:DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882
    ASTM B 244, B499, D7091, E 376
    Dimensions:Approximately 5.2” long x 1.06: in diameter
    Weight with Battery:80 g or 2.8 oz.
    † according to DIN 55350, part 13. SIDSP is a registered trademark of ElektroPhysik.

    Included: MiniTest 70 F or MiniTest 70 FN; Steel test plate (for model 70F); Steel and aluminum test plates (for model 70 FN); Calibration foils; Operating instructions; Certificate of Conformity; Gage tether; Storage case.

Standards

DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882 ASTM B 244, B499, D7091, E 376

Delivery Content

Included: MiniTest 70 F or MiniTest 70 FN; Steel test plate (for model 70F); Steel and aluminum test plates (for model 70 FN); Calibration foils; Operating instructions; Certificate of Conformity; Gage tether; Storage case

Join our Email List. subscribe
CANCEL