Site Map    Contact Us
Search Our Site

 

 

 

AccuMAX™ XRP-3000

Advanced Digital Radiometer/Photometer Kit

Specially Engineered for NDT Applications

 

AccuMax™ XRP-3000 Single detector with dual sensors measures both ultraviolet and visible light. Complete with MIL and ASTM specifications for MPI and FPI.

FEATURES

  • Microprocessor-controlled readout unit with dual-wavelength sensor detector
  • Superior bandpass interference filter
  • Choice of direct or USB connection between sensor detector and readout unit
  • Excellent cosine response
  • User-defined power save and automatic shutoff
  • Large, easy-to-read LCD screen
  • Sealed sensor housing and USB connection with water-resistant adapter

 

Accurate
The AccuMAX™ XRP-3000 radiometer/photometer kit uses a dual-wavelength UV-A/VIS sensor detector to measure both ultraviolet and visible light. Featuring automatic zeroing, integration and signal hold, the unit provides accurate readouts for UV, visible irradiance or radiance. The LCD readout features ±0.2% linearity with the sensor sending the linearity correction data to the readout unit during initial power up. To ensure consistent results, sensors are designed with superior bandpass fi lters while optical stacks are assembled in Class 100 clean workstations. For precise spectral coverage, high-quality interference filters are used to resist degradation.


Durable
The rugged meter housing features a removable, rubber protective boot for better grip and to help prevent accidental breakage. It also provides superior protection against moisture contamination, shock and humidity. In addition, the XRP-3000 features a liquid- and water-resistant, sealed sensor housing with a special self-sealing ring to help eliminate light leakage.


Simple Operation
The XRP-3000 meter’s microprocessor is the heart of its simplicity. Just four pressure-sensitive buttons on the readout unit’s membrane keypad offer an extensive array of advanced functions. For example, to subtract ambient light, the user need only press the “ZERO” button. this activates auto zeroing, sets the value to 0 and displays relative readings of subsequent measurements. “HOLD” freezes the display thus obtained, while “INTG” displays the average UV intensity after incorporating the UV energy over time. These functions and other user-selectable parameters are easily accessible through the software’s main and sub menus.


Reliable
The XRP-3000 radiometer is carefully quality-controlled to ensure that each unit has up-to-date calibration and meets stringent measurement requirements. Housed in a durable polycarbonate case, it features dependable solid-state electro-optical circuitry for long, trouble-free operation.


Portable
The XRP-3000 is compact, lightweight and battery-operated for convenient use in the factory, field or any other location where measurements need to be taken. A slide-out panel allows for easy replacement of the unit’s 9-volt batteries.


Versatile
The XRP-3000 offers extreme flexibility in the workplace. For technicians performing radiographic examinations, the XS-555/L luminance sensor detector is available as an accessory to provide film viewer output measurements in cd/m2, cd/ft2 or fL.

 

 

AccuMAX™ XRP-3000 Specifications


Readout Unit (XR-1000)
Resolution: 4-digit autoranging display
Screen: 128 x 64 dot pixel chip on glass
STN transmissive monochrome
LCD - 2.8 in (7.1 cm) diagonal illuminated (backlit)
Sampling Rate: 7.5 Hz (single sensor)
15 Hz (dual sensor)
Read Update: 2 Hz
Overall Accuracy: Better than ±5% with reference to NIST standards
Temperature Coefficient: ±0.025%/°C (0 to 50°C)
Dual UV-A/Visible Sensor Detector (XDS-1000)
Irradiance Range UV-A Sensor 0 - 100 mW/cm2
Visible Sensor 0 - 5,300 lux (0 - 500 fc)
Battery Operation Two non-rechargeable 9V alkaline battery cells are included as standard
Dimensions Readout Unit Sensor Detector
  • Length 7.75 in (19.7 cm)
  • Width 4.25 in (10.8 cm)
  • Thickness 1.25 in (3.2 cm)
  • Weight 0.8 lb (360 g)
  • Length 4.75 in (12.1 cm)
  • Width 2.0 in (5.1 cm)
  • Thickness 7/8 in (2.2 cm)
  • Weight 0.22 lb (100 g)
USB Cable 5 ft (1.5 m)


Available Items
Item Number Item
UV-055010 AccuMAX™ XRP-3000 NDT Radiometer/Photometer Kit complete with: XR-1000 Digital Readout Unit, XDS-1000 Dual UV-A/VIS Sensor, XCB-100 Water-Resistant USB Connector Cable and XCC-100 Carrying Case
AccuMAX™ Meter Series
UV-055103 XR-1000 Digital Readout Unit (Industrial UV Light Bulbs).
UV-055105 XF-1000 Digital Readout Unit (UV Fluorescent Tubes)
UV-055107 XDS-1000 Dual UV-A/VIS Sensor*
UV-055109 XS-254 254nm Sensor (Standard Range)
UV-055111 XTS-254 254nm Sensor (Extended Range)
UV-055113 XS-300 300nm Sensor (Standard Range)
UV-055115 XTS-300 300nm Sensor (Extended Range).
UV-055117 XS-365 365nm Sensor (Standard Range)
UV-055119 XTS-365 365nm Sensor (Extended Range)
UV-055121 XS-405 405nm Sensor (Standard Range)
UV-055123 XTS-405 405nm Sensor (Extended Range)
UV-055125 XS-450 450nm Bilirubin Sensor (Standard Range)
UV-055127 XTS-450 450nm Bilirubin Sensor (Extended Range).
UV-055129 XS-555/1 Visible Illuminance Sensor
UV-055131 XS-555/L Visible Luminance Sensor
Accessories/Replacement Parts
UV-055211 XCB-100 Water-Resistant USB Connector Cable*
UV-055213 XCC-100 Carrying Case*
UV-055215 XRB-100 Rubber Boot for Digital Readout Units*
* Included in the Kit

 

Home   Lab Apparatus    How To Order     Top Of The Page Paul N. Gardner Company, Inc. • Phone 1.800.762.2478 • Fax 954.946.9309