• Cup or dip style testing in a convenient picket sized meter
• Single or one point per range calibration
• Auto shutoff, low-battery indicator, error messages
Never watch a tester sink to the bottom of your tank or pond! These waterproof testers float, so there’s no need to worry. Valox® housing and stainless steel electrodes offer good chemical compatibility and durability. All waterproof Testrs have replaceable sensors. Reuse the meter body many times without losing waterproof and dustproof protection.
Technical Data
TDSRange:
0 to 200.0, 0 to 2000 ppm; 0 to 10.00 ppt
TDSResolution:
0.1, 1 ppm; 0.01 ppt
Accuracy:
±1% full-scale (of range)
Calibration:
Push button, one point per range
Temperature:
32 to 122°F (0 to 50° C)
Waterproof/ Dustproof (IP67):
Yes
ATC:
Yes
Electrode:
Replaceable
Power:
Four 1.5V batteries (included)
Battery life:
>150 hours
Dimensions:
6-1/2”L x 1-1/2” diameter
Shipping Weight:
0.45 lbs
Available Items
Item Number
Item
CD-246123
TDSTestr 11 Plus
OAKTON™ ECTestr 11 Plus
Three ranges for maximum resolution
• Automatically or manually select measuring range
• Waterproof, dustproof housings float
• Push-button calibration, HOLD function and error messages
Use these testers for either cup-style or dip-style measurements. For cup style, pour a small amount of your sample directly into the sensor cup until it overflows; for dip style, simply immerse tester tip into sample. Replaceable sensor lets you reuse meter body many times over. Valox® housing and stainless steel electrodes
for good chemical compatibility. Note: Before measuring, calibrate tester as either cup or dip style (depending on intended method of use).
