| Item/Type Number
|
Item
Description |
 |
| Type 2-E |
 |
Two pins, 5/16" penetration. Use on plaster, masonary, paper
tubes, wood |
| Type 4-E |
 |
Four pins, 5/16" penetration. Use on wood up to 1-1/2" thick. |
| Type 12-E |
 |
Double-roller type. Use on a moving web of paper or textile. |
| Type 15-E |
 |
Eight pins, 1/8" penetration. Use on veneer, cardboard,
leather, paper. |
| Type 18-ES |
 |
Two pins (insulated), 3-1/4" penetration. Use on heavy timber,
poles and ties. Also available as type 18-ED with depth gauge. |
| Type-19-E |
 |
Two blades, 5" long. Use on stacked paper and veneer. |
| Type-19-E/STC |
 |
2 teflon coated blades bent @ 30°, for trim and baseboard molding |
| Type 21-E |
 |
Two pins (insulated), 3-1/4" penetration. Use on insulation
and roofs |
| Type 22-E |
 |
Two pins, 1/2" penetration. Use on plater, masonry and wood.
Will also take #496, insulated pins; 1-1/16" penetration. |
| Type 26-ES |
 |
Two pins, 1-1/16" penetration. Use to measure
moisture content in wood at different levels of penetration without being
affected by increasing contact between pins and wood. Ideal for shell
and core tests, to detect moisture gradients and to test lumber with wet
surfaces. |
| Type 30-E/C |
 |
Two pins (insulated), 9" penetration. Use for baled fibers, cotton, jute, etc |
| Type 37-E/C |
 |
Eight pins (insulated), 3/4" penetration, Use for yarn |
| Type 42-EB |
 |
T-handle electrode with
3/8" penetration. Insert the 3' steel handle in a stack in the yard, kiln, or predryer to find wet spots and obtain a reliable "estimate" of moisture content. Stickers must be at least 5/8" |
| Type 43-E |
 |
Clamp type. Use for flat paper stock, fiberboard, thin veneer |
| Type 55-E |
 |
Leaf type. Use for paper, or textile on a moving web |
| Type 59-E |
 |
Surface type. Use for granular material. |
| Type H-4 |
 |
Electrode Handle. Use with 830 series prod-type electrode. |
| Type 830-2 |
 |
Co-axial prod. Use on baled or shredded material. Available in 10", 18" or 36 |
| Type 831 |
 |
Multi-pin prod. 1/2" penetration.
Use on chopped hay, sawdust and shavings |
| Type 832 |
 |
Multi-pin prod. 3-1/4" penetration.
Use on bagged seed or grain. Also on sawdust and shavings |
Site Map 
Contact Us 
