 |
| Digital Handheld Contact Tachometers |
 |
|
| Microprocessor Controlled |
 |
These hand-held tachometers offer total length in meters, centimeters, inches, feet and yards. In addition, total revolutions can be displayed. Now the speed of ten individual machines can be stored and retained in memory for 5 minutes or longer.
The S12 models (DT-105A-S12 & DT-107A-S12) have a 12" master wheel which rotates more slowly than the standard 6" wheel, thus enabling confident and safe high speed measurement. 1/4 x 20 tripod mounting hole included. |
| Technical Data |
| Cat. Number: |
TA-4006 (Model DT-105A)
TA-40061 (Model DT-105A-S12) |
TA-4008 (Model DT-107A)
TA-40081(Model DT-107A-S12) |
| Measuring Range: |
0.10 to 25,000 rpm with floating decimal |
| Accuracy: |
±0.06 rpm: 0.10 to 999.99 rpm
±0.6 rpm: 1,000 to 9,999.9 rpm
±0.006% of reading ± 1 digit (or ±2rpm max.) :10,000 to 25,000 rpm |
| Display: |
5 digit 0.47" (12mm) high LCD |
5 digit 0.4" (10mm) high LED |
| Measuring Units: |
Revolutions: RPH, RPM Feet; FPH, FPM Miles; MPH |
| Yards: YPH, YPM |
| Inches: IPM |
| Meters: mPH, mPM |
| Length: m, cm, inches, feet, yards |
| Total revolutions: REV |
| Memory: |
13 readings are stored in memory and retained for 5 minutes (last, max., min. and 10 extra measurements) |
| Display Update Time: |
1 second typical |
| Detection: |
Optical Coupler, 60 pulses/rev. |
| System Control: |
Single-chip C-MOS microprocessor |
| Over Range Indicator: |
Flashing numerals |
| Voltage Requirement: |
Size: 2 AA 1.5V |
Size: 2 AA 1.5V |
| Battery Life: |
Life: Approx. 65 hours |
Life: Approx. 40 hours |
| Low Battery Indicator: |
Flashing "LO BAT" display |
"B" display |
| Auto Power Shut-Off |
Yes |
| Operating Temperature: |
32° to 113°F (0 to 45°C) |
| Decimal Point: |
Floating |
| Construction: |
Die-cast aluminum housing |
| Weight: |
0.9 pounds (400g) |
| Dimensions: |
7.2"L x 2.4"W x 1.8"H |
| Warranty: |
1 year |
| Accessories Included: |
2 Cone Adapters, 1 Funnel Adapter, 3-1/2" Extension Shaft, Carrying Case, 1 Master Wheel (6" cir.), (S12 Models 12" cir.), NIST traceable certificate. |
| Optional Accessories: |
Wire/ Yarn Fixture, 12” Grooved Wheel also available |
| Accessories Included: |
Cone Adapters (Fig. 1) Standard 1/2", optional [3/4", 1-1/4" (Fig. 2)]
Funnel Adapter (Fig. 3) Standard, 3/4"
Measuring Wheels (Fig. 4) 6” flat or grooved,12” flat or grooved. |
 |
| Multi-Mode Speed Selection: |
Per Minute RPM, FPM, mPM, YPM, IPM, MPH |
| Per Hour RPH, FPH, mPH, YPH, IPH |
|
 |
Prices subject to change  Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
|
| Item Number |
Item |
Prices |
| TA-4006 |
w/6" master wheel |
$270.00 |
| TA-40061 |
w/12" master wheel |
310.00 |
| TA-4008 |
w/6" master wheel |
270.00 |
| TA-40081 |
w/12" master wheel |
310.00 |
|
| Digital Handheld Laser Tachometers |
|
| Microprocessor Controlled |
With the notable exception of a new Bright Red Laser aiming dot and RPM measurements up to 20 feet, the new tachometers work exactly the same as existing model DT-205L and DT-207L.
Safety compliant. Great for RPM measuring without switching off machine. Laser accurate measurements at safe distances through protective devices.These laser models feature an expanded memory (ten independent readings plus last, max and min.), battery life is 7 times greater, reduced to 2 AA batteries and also an expanded measuring range of up to 99,999RPM. The S12 models (DT-205LR-S12 & DT-207LR-S12) have a 12" master wheel which rotates more slowly than the standard 6" wheel, thus enabling confident and safe high speed measurement.
The included contact adapter enables the measurement of five additional rate functions (RPM, YPM, mPM, FPM and IPM) as well as four length functions (yards, meters, feet and inches).1/4 x 20 tripod mounting hole included. |
 |
| DT-205LR Shown |
| Technical Data |
| Cat. Number |
TA-4016 (Model DT-205LR)
TA-40161 (Model DT-205LR-S12) |
TA-4018 (Model DT-207LR)
TA-40181 (Model DT-207LR-S12) |
| Measuring Range: |
6 to 99,999 rpm |
| Accuracy: |
±1 rpm: 6 to 8,300 rpm
±2 rpm: 8,300 to 25,000 rpm
±0.006% of reading ± 1 digit (or ±6 rpm max.): 25,000 to 99,999 rpm |
| Display: |
5 digit 0.47" (12mm) high LCD |
5 digit 0.4" (10mm) high LED |
| Measuring Units: |
RPM (on contact using adapter, included) for YPM, mPM, FPM, IPM and Length: YRD, MFT and IN use 6" cir. wheel with 200L adapter |
| Memory: |
13 readings are stored in memory and retained for 5 minutes (last, max., min. and 10 extra measurements) |
| Display Update Time: |
1 second typical |
| Detection: |
Laser diode |
| System Control: |
Single-chip C-MOS microprocessor |
| Over Range Indicator: |
Flashing numerals |
| Voltage Requirement: |
Size: 2 AA 1.5V |
Size: 2 AA 1.5V |
| Battery Life: |
Life: Approx. 40 hours |
Life: Approx. 25 hours |
| Low Battery Indicator: |
Flashing "LO BAT" display |
"B" display |
| Auto Power Shut-off: |
Yes |
| Operating Temperature: |
32° to 113°F (0-45°C) |
| Construction: |
Die-cast aluminum housing |
| Weight: |
0.8 pounds (365g) |
| Dimensions: |
6.6"L x 2.4"W x 1.8"H (167mm x 61mm x 45.7mm) |
| Warranty: |
1 year |
| Accessories Included: |
Reflective Tape (1" x 7-3/4" Strip), 1/2" x 1/2" - 35 Tabs
Cone Adapters: Standard 1/2" ( Optional 3/4", 1-1/4")
Funnel Adapters: Standard, 3/4"
Measuring Wheels: FPM (6” or 12" cir.)
YPM (0.1 yrd. cir.)
mPM (0.1 met. cir.)
Extension Shaft: 3-1/2", NIST traceable certificate. |
| Model 200LR Adapter for
contact operation (screws on the tach converting it for direct contact use- Included) |
 |
|
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
|
| Item Number |
Item |
Prices |
| TA-4016 |
w/6" master wheel |
$295.00 |
| TA-40161 |
w/12" master wheel |
335.00 |
| TA-4018 |
w/6" master wheel |
295.00 |
| TA-40181 |
w/12" master wheel |
335.00 |
|
| All Metal Handheld Laser Tachometer |
|
| Microprocessor Controlled |
| With USB and Analog ports and Multi-mode Memory |
Safety compliant. Great for RPM measuring without switching off machine. Laser accurate measurements at safe distances through protective devices.
The DT-209X is ideal for providing maintenance professionals, quality control and production engineers a way to store and download data while allowing full time, HANDS FREE monitoring of Rate and Length measurements. Simultaneous storage of data in three measuring modes (USB, Standard and Average). Both the DT-209X and DT-209X-S12 offer incredible value and ease of use in Contact and Non-contact applications.
The DT-209X tachometer is ideal for spot measurements or trend monitoring of many processes. Conveyor speed, motor and shaft RPM in pulp and paper, chemical, printing, packaging, mining, food processing, aerospace, automotive, diesel engine repair, medical production, research and development, centrifuge testing and many other industrial applications are just a few of the applications where the DT-209X excels.
|
 |
- 1/4 x 20 mounting hole
- Sophisticated laser beam detection: up to 14’
- Exceptional accuracy
- Length and rate functions
- Multi-mode speed selection
- Length/sec available
|
- Hardy aluminum construction
- Large 5 digit display
- Expansive memory capacity
- Extended battery life
- Free N.I.S.T. certificate
|
| Technical Data |
| Cat. Number |
Models DT-209X and DT-209X-S12 |
| Measuring Range: |
(Non Contact) 6 to 99,999 rpm |
| Measuring Range: |
(Contact) 0.8 - 25,000 rpm |
| Accuracy: |
±1 rpm: 6 to 8,300 rpm
±2 rpm: 8,301 to 25,000 rpm
±0.006% of reading, ± 1 digit (or 7 rpm max.): 25,001 to 99,999 rpm |
| Display: |
5 digit 0.47" (12mm) high LCD |
| Measuring Units: |
RPM (on contact using adapter, included) for rate: YPM, mPM, FPM, IPM and Total Length: YRD, m, FT, IN use 6" cir. wheel with 200L adapter |
| Measuring Mode: |
USB mode: PC online measuring
Standard (STD) mode: Standard measuring
Average (AVE) mode: Average data measuring |
| Memory: |
STD mode: 24 blocks, 10 points/block (Total: 240 data)
AVE mode: 30 blocks (Last, Max, Min, Average data in each block)
Date and hour of start/finish are stored in each block
(Data can be downloaded with USB communication) |
| USB Communication: |
USB1.1 |
| Analog Output: |
Max. 1V |
| Display Update Time: |
1 second typical |
| Detection Laser: |
diode |
| System Control: |
Single-chip C-MOS microprocessor |
| Over Range Indicator: |
Flashing numerals |
| Voltage Requirement: |
2 AA 1.5V |
| Low Battery Indicator: |
Flashing "LO BAT" display |
| Auto Power Shut-off: |
Yes (Except USB mode) |
| Battery Life: |
15 hours Approx. |
| Operating Temperature: |
32° to 113°F (0-45°C) |
| Construction: |
Die-cast aluminum housing |
| Weight: |
DT-209X: 0.9 pounds (400g) / DT-209X-S12: 1.0 pound (460g) |
| Dimensions: |
6.6"L x 2.4"W x 1.8"H (167.5mm x 60mm x 46mm) |
| Warranty: |
1 year |
| Accessories Included: |
Reflective tape, 2 cone adapters, 1 funnel adapter, carrying case, NIST certificate, 3.5” ext. shaft, 1 Master Wheel (DT-209X = 6” cir. wheel; DT-209X-S12 = 12” cir. wheel) and 200L adapter, USB cable, Application software |
|
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
|
| Item Number |
Item |
Prices |
| TA-401920 |
DT-209X Laser Tachometer with Software |
$380.00 |
| TA-401921 |
DT-209X-S12 Laser Tachometer with Software |
420.00 |
| Options |
| TA-401925 |
Analog Data Cable |
15.00 |
|
|
|
