 |
| AccuMAX™ XRP-3000 |
 |
|
|
Advanced Digital Radiometer/Photometer Kit |
| Specially Engineered for NDT Applications |
 |
Single detector with dual sensors measures both ultraviolet and visible light. Complete with MIL and ASTM specifications for MPI and FPI. |
- Microprocessor-controlled readout unit with dual-wavelength sensor detector
- Superior bandpass interference filter
- Choice of direct or USB connection between sensor detector and readout unit
- Excellent cosine response
- User-defined power save and automatic shutoff
- Large, easy-to-read LCD screen
- Sealed sensor housing and USB connection with water-resistant adapter
- Comes in rugged aluminum attache type carry case
|
Accurate |
| The AccuMAX™ XRP-3000 radiometer/photometer kit uses a dual-wavelength UV-A/VIS sensor detector to measure both ultraviolet and visible light. Featuring automatic zeroing, integration and signal hold, the unit provides accurate readouts for UV, visible irradiance or radiance. The LCD readout features ±0.2% linearity with the sensor sending the linearity correction data to the readout unit during initial power up. To ensure consistent results, sensors are designed with superior bandpass filters while optical stacks are assembled in Class 100 clean workstations. For precise spectral coverage, high-quality interference filters are used to resist degradation. |
-
|
Durable |
| The rugged meter housing features a removable, rubber protective boot for better grip and to help prevent accidental breakage. It also provides superior protection against moisture contamination, shock and humidity. In addition, the XRP-3000 features a liquid- and water-resistant, sealed sensor housing with a special self-sealing ring to help eliminate light leakage. |
-
|
Simple Operation |
| The XRP-3000 meter’s microprocessor is the heart of its simplicity. Just four pressure-sensitive buttons on the readout unit’s membrane keypad offer an extensive array of advanced functions. For example, to subtract ambient light, the user need only press the “ZERO” button. this activates auto zeroing, sets the value to 0 and displays relative readings of subsequent measurements. “HOLD” freezes the display thus obtained, while “INTG” displays the average UV intensity after incorporating the UV energy over time. These functions and other user-selectable parameters are easily accessible through the software’s main and sub menus. |
| |
| Reliable |
| The XRP-3000 radiometer is carefully quality-controlled to ensure that each unit has up-to-date calibration and meets stringent measurement requirements. Housed in a durable polycarbonate case, it features dependable solid-state electro-optical circuitry for long, trouble-free operation. |
| |
Portable |
| The XRP-3000 is compact, lightweight and battery-operated for convenient use in the factory, field or any other location where measurements need to be taken. A slide-out panel allows for easy replacement of the unit’s 9-volt batteries. |
| |
Versatile |
| The XRP-3000 offers extreme flexibility in the workplace. For technicians performing radiographic examinations, the XS-555/L luminance sensor detector is available as an accessory to provide film viewer output measurements in cd/m2, cd/ft2 or fL. |
| AccuMAX™ XRP-3000 Specifications |
| Readout Unit (XR-1000) |
| Resolution: |
4-digit autoranging display |
| Screen: |
128 x 64 dot pixel chip on glass |
| STN transmissive monochrome |
| LCD - 2.8 in (7.1 cm) diagonal illuminated (backlit) |
| Sampling Rate: |
7.5 Hz (single sensor) |
| 15 Hz (dual sensor) |
| Read Update: |
2 Hz |
| Overall Accuracy: |
Better than ±5% with reference to NIST standards |
| Temperature Coefficient: |
±0.025%/°C (0 to 50°C) |
| Dual UV-A/Visible Sensor Detector (XDS-1000) |
| Irradiance Range: |
UV-A Sensor 0 - 100 mW/cm2 |
| Visible Sensor 0 - 5,300 lux (0 - 500 fc) |
| Battery Operation: |
Two non-rechargeable 9V alkaline battery cells are included as standard |
| Dimensions: |
Readout Unit: |
Length 7.75 in (19.7 cm), Width 4.25 in (10.8 cm), Thickness 1.25 in (3.2 cm), Weight 0.8 lb (360 g) |
| Sensor Detector: |
Length 4.75 in (12.1 cm), Width 2.0 in (5.1 cm), Thickness 7/8 in (2.2 cm), Weight 0.22 lb (100 g) |
| USB Cable: |
5 ft (1.5 m) |
- XR-1000 digital readout unit
- XDS-1000 dual UV-A/VIS sensor
|
- XCB-100 water-resistant USB connector cable
- XCC-100 aluminum carrying case
|
|
|
|
 |
Prices subject to change  Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
|
| Item Number |
Item |
Prices |
| UV-055010 |
AccuMAX™ XRP-3000 NDT Radiometer/Photometer Kit |
$1,361.00 |
| AccuMAX™ Meter Series |
| UV-055103 |
XR-1000 Digital Readout Unit (Industrial UV Light Bulbs) |
767.00 |
| UV-055105 |
XF-1000 Digital Readout Unit (UV Fluorescent Tubes) |
767.00 |
| UV-055107 |
XDS-1000 Dual UV-A/VIS Sensor* |
569.00 |
| UV-055109 |
XS-254 254nm Sensor (Standard Range) |
790.00 |
| UV-055111 |
XTS-254 254nm Sensor (Extended Range) |
806.00 |
| UV-055113 |
XS-300 300nm Sensor (Standard Range) |
563.00 |
| UV-055115 |
XTS-300 300nm Sensor (Extended Range) |
521.00 |
| UV-055117 |
XS-365 365nm Sensor (Standard Range) |
374.00 |
| UV-055119 |
XTS-365 365nm Sensor (Extended Range) |
391.00 |
| UV-055121 |
XS-405 405nm Sensor (Standard Range) |
438.00 |
| UV-055123 |
XTS-405 405nm Sensor (Extended Range) |
454.00 |
| UV-055125 |
XS-450 450nm Bilirubin Sensor (Standard Range) |
403.00 |
| UV-055127 |
XTS-450 450nm Bilirubin Sensor (Extended Range) |
421.00 |
| UV-055129 |
XS-555/1 Visible Illuminance Sensor |
335.00 |
| UV-055131 |
XS-555/L Visible Luminance Sensor |
449.00 |
| Accessories/Replacement Parts |
| UV-055211 |
XCB-100 Water-Resistant USB Connector Cable* |
45.00 |
| UV-055213 |
XCC-100 Aluminum Carrying Case* |
57.00 |
| UV-055215 |
XRB-100 Rubber Boot for Digital Readout Units* |
17.00 |
| * Included in the Kit |
|
|
|
|
