Site Map    Contact Us
Search Our Site

 

 

 

Traceable® Controllers

5010 Traceable® Lab Controller*

 

5150 Traceable Lab Controller Controls any appliance plugged into the back of the controller.
In the time of day mode, it may be programmed for up to 224 on/off switchings per day or up to 1568 switchings per week. In the countdown mode, it turns on/off to the very second.

Three unique timing modes. Three independent timing channels may be used to countdown and alarm, count-up (stopwatch mode) or countdown repeat (repetitively alarms at a specific time interval). Times from 1 second to 100 hours. Alarms sound and flash until manually stopped or may be set to automatically turn off. Adjustable volume control permits loud to whisper-quiet alarms. The calculator feature adds, subtracts, multiplies and divides on a six-digit display.

 

 

Performance:


Switching Capability: 125 VAC, 50/60 Hz, 15 amps, 1875 watts
Timing Accuracy: 0.01%
Cycle Duration: Minimum 1 sec, Maximum 168 hr
On/Off Programs: 1568 per week, 224 per day



Available items
Item Number Item
TM-505010 Traceable® Lab Controller



4130 Traceable® Temperature Controller*
  • Turn equipment on/off at any temperature
  • Wide setting range of -4 to 140°F and -20 to 60°C permits maintaining temperatures above or below ambient.
  • Controller may be set in 1° increments.
  • Display reads in °F and °C with a 0.1° resolution.
  • Red LED status light indicates on/off mode of attached equipment.
  • May also be programmed to turn equipment on and off at any minute of any day.
  • “Always remember” memory permits programming three different pairs of on/off time switchings per day.
  • Manual over-ride permits equipment to be switched on or off instantly without disturbing temperature or timer settings.
  • Range is -4 to 140°F (-20 to 60°C). Controls to ±1°C
  • Weight is 1 pound
  • Can be used with equipment to 1800 watts, 15 amps
 4130 Traceable Temperature Controller


Available items
Item Number Item
TM-504130 Traceable® Temperature Controller

 

 

4190 Traceable® Temperature Controller*

Humidity outlet switch turns any piece of equipment on or off. Program “higher-ON/lower-OFF” or “lower-ON/higher-OFF” switching at any set point from 30 to 90% RH in 1% increments. Use for turning humidifiers, dehumidifi ers or alarms on or off. Three-button operation is extremely easy and fast.

Manual override permits equipment to be switched on or off instantly without disturbing the program. Rechargeable nicad battery maintains operation for days in the event of an electrical outage. UL-rated relay turns apparatus on/off to 125 VAC, 15 amps, 1800 watts, 1/3 horsepower.

 4190 Traceable® Temperature Controller


Available items
Item Number Item
TM-504190 Traceable® Humidity Controller

 

 

5055 24-Hour Electromechanical Controller
5056 Traceable® 7-Day Controller
5055 24-Hour Electromechanical Controller

Units combine a controller and an eight-outlet strip in a single package. Four of the outlets are time-controlled and four are manual. An override permits equipment to be switched on or off instantly without disturbing the program. The unit is UL-listed and rated to 15 amps, 1000 watts at 125 VAC.
24-Hour Controller has index pins, which are raised or lowered to set trip times in 15-minute increments.

This unit is NOT traceable to NIST.


7-Day Traceable® Controller will turn equipment on and off in intervals as short as 1 minute or as long as 168 hours with up to 12 different switchings per day. The repeat mode allows scheduling a weekly program cycle for 52 weeks, jumping weekends, or skipping any selected days.


Available items
Item Number Item
TM-505055 24-Hour Electromechanical Controller
TM-505056 Traceable® 7-Day Controller

 

 

5050 Traceable® Timer Switch Controller*

Program up to 196 switchings per week. 14 different switchings per day.

  • Schedule an entire week with the press of a few buttons.
  • A manual override permits equipment to be switched on or off without disturbing the program.
  • CSA-and NTRL-C-rated, controls equipment to 125 VAC, 50/60 Hz, 15 amps, 1850 watts with a timing accuracy of 0.01%
 5050 Traceable® Timer Switch Controller
Item Number Item
TM-504190 Traceable® Humidity Controller



5060 24-Hour Dial Controller and 5070 7-Day Dial Controller

5060 24-Hour Dial Controller and 5070 7-Day Dial Controller Unique index pin memory permits programming the unit to exact time requirements. Pins constantly display all of the time settings. UL listing allows use with electrical equipment up to 125 VAC, 15 amps, 1875 watts, and 1/3 horsepower. 24-hour unit may be set in any number of 15-minute increments, 7-Day Controller in any number of 2-hour increments. The 7-day unit may be programmed to skip weekends or any days. Using the manual override, equipment can be switched on/off without disturbing the program.

 

Available items
Item Number Item
TM-505060 24-Hour Dial Controller
TM-505070 7-Day Dial Controller

 

*Traceable to NIST for accuracy To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer’s ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).

 

Home   Lab Apparatus   How To Order   Top Of The Page Paul N. Gardner Company, Inc. • Phone 1.800.762.2478 • Fax 954.946.9309