Gardco :: Rapid Flash Point Tester

Rapid Flash Point Tester

The Rapid Tester® is a semiautomatic instrument for determining the flash point temperature / combustibility of flammable liquids. Closed cup test temperatures from ambient to 572°F (300°C) are automatically controlled by the set-a-temp adjustable digitally preset target temperature circuitry. Integral digital LCD display, NIST traceable thermometer, disposable fuel tank and electronic timer are standard.

In accordance with:
ASTM D 3278	BS 3900 Part A14	ISO 3679
ASTM D 3828	CPSC CFR 16-1500.43a	ISO 3680
ASTM D 4206	DOT CFR 49-173.115	OSHA 29CFR 1910-106
BS 3900 Part A11	IATA Resolution 618 Attachment A	OSHA 29CFR 1910-1200
BS 3900 Part A13	IP 303

	Quality Assurance
	Verify the formulation of liquid products with flammable ingredients.
	Compliance Testing
	Often required by regulatory agencies before transport or disposal of liquids
	Fuel Dilution
	Determine the relative percentage of fuel in engine crank case oil to forecast the need for engine rebuilding.

Digital Accuracy

Achieve the high level of digital performance offered only by the Rapid Tester®. The high contrast LCD display has 1/2" characters for ease of reading and is switch selectable between degrees Fahrenheit and Centigrade. A thermometer traceable to the National Institute of Standards & Technology is also included.

Unique set-a-temp circuitry permits simple adjustment and precise automatic regulation of test temperatures. Depress the Preset switch while turning the Temperature Control knob until the target temperature is displayed. Release the switch and set-a-temp takes over! Test cup temperature is automatically shown on the digital LCD display.

Fast Test-Small Sample

Test time is only one minute with a 2 ml sample for flash points below 212°F (100°C). You can run ten tests with the Rapid Tester® in the time that it takes to perform just one by other methods. The 2 ml/4 ml sample is a fraction of the large sample required by other flash point methods. This reduces sampling and disposal problems while improving safety.

Two Models

The Rapid Tester® Closed Cup Model RT-01 has a testing range from -22° to 572°F (-30° to 300°C). Open Cup Model RT-02 tests for flash point levels from ambient to 212°F (100°C).

Compare Results

Independent laboratory testing has demonstrated that the ASTM D 3828 test method utilized by the Rapid Tester® correlates well with other flash point methods. In ASTM D-2 Round Robin testing it was found that the ASTM D 3828 test method has the following correlation coefficients:

D 3828 (Rapid Tester®) vs. D 56 (Tag) = 0.9949
D 3828 (Rapid Tester® vs. D 93 (Pensky-Martens) = 0.9943
D 56 vs. D 93 = 0.9926

With better than 99% comparability you can use the Rapid Tester® with confidence.

Characteristics

Performance (RT-01)
Repeatability	0.5° @ 70°C
	2.0° @ 150°C
Reproducibility:	2.0° @ 70°C
	7.5° @ 150°C
Test Time:	1 min below 212°F
	2 min above 212°F (100°C)
Physical
Cup Type:	RT-01 Closed
	RT-02 Open
Cup Material:	Aluminum (316ss optional)
Dimensions:	15.0 x 3.4 x 6.3"
	(38.1 x 8.64 x 16.25cm)
Display:	LCD digital and NIST traceable mercury-in-glass thermometer
Net Weight:	10 lbs (4.6 Kg)
Power Requirements:	115/230V, 50/60 Hz
Sample Size:	RT-01	2 ml below 212°F
		4 ml above 212°F (100°C)
	RT-02	2 ml
Temperature Range:	RT-01	-22° to 572°F (-30° to 300°C)
	RT-02	Ambient to 212°F (100°C)

Warranty

Rapid Tester instrumentation is warranted against defects in materials and workmanship for one year from date of shipment and will be repaired or replaced at our option. This warranty is exclusive of shipping charges, consumable components or misuse. The liability of Gardco is limited to such repair or replacement. No warranty of fitness for a particular purpose or liability for consequential or other damages shall be implied.

Available Items


Item Number	Item
FP-1000	Rapid Tester®, Closed Cup, -22° to 572°F (-30° to 300°C) Aluminum Test Cup/Brass Lid & Shutter
FP-1000/SS	Rapid Tester®, Closed Cup, -22° to 572°F (-30° to 300°C) 316ss Test Cup/316ss Lid & Shutter
FP-1100	Rapid Tester®, Open Cup, Ambient to 212°F (100°C) Aluminum Test Cup
FP-1100/SS	Rapid Tester®, Open Cup, Ambient to 212°F (100°C) 316 Stainless Steel Test Cup
Accessories
FP-1720	316 SS Lid & Shutter assembly replacement
FP-1660	316 SS Cup assembly replacement
FP-1740	Standard Brass Lid & Shutter Assembly Replacement
FP-1670	Heat Transfer Compound
FP-1680	Metal Cooling Block
FP-1690	Refrigerant Charged Cooling
FP-1710	Syringe 2ml / 4ml
FP-1730	Fuel Cylinder
FP-1750	Gasket
FP-1760	Valve Assembly
Thermometers (Traceable to N.I.S.T)
FP-1810	32° to 572°F (0° to 300°C)
FP-1820	32° to 230°F
FP-1830	0° to 110°C
FP-1840	-36° to 105°F
FP-1850	-38° to 40°C
FP-1860	212° to 572°F
FP-1870	100° to 300°C
ASTM Flashpoint Standards
FP-1981	ASTM D 56 @ 50°C, ASTM D 93 @ 55°C (200ml)
FP-1983	ASTM D 56 @ 66°C, ASTM D 92 @ 79°C, ASTM D 93 @ 72°C (200ml)
FP-1985	ASTM D 92 @ 116°C, ASTM D 93 @ 113°C (200ml)
FP-1987	ASTM D 92 @ 137°C, ASTM D 93 @ 132°C (200ml)
FP-1989	ASTM D 92 @ 163°C, ASTM D 93 @ 155°C (200ml)
FP-1991	ASTM D 92 @ 224°C, ASTM D 93 @ 218°C (200ml)

Note: This leaflet contains only a general description of the Rapid Flash Point Tester. While uses and performance capabilities are described, under no circumstances should the product be used except by qualified, trained personnel and not until the instructions, labels, or other literature accompanying it have been carefully read and understood and the precautions therein set forth followed. Only they contain the complete and detailed information concerning this product. Not intended for use in hazardous areas. The manufacturer reserves the right to alter design and/or specifications without notice.

Home Lab Apparatus How To Order |Top Of The Page

Paul N. Gardner Company, Inc. • Phone 1.800.762.2478 • Fax 954.946.9309