 |
| Motorized Force Test Systems |
 |
|
| Series MT-500 - Full-Featured Force Test Stands for Film and Paper |
| Meets specifications of ASTM D882 Standard Test Method for Tensile Testing of Plastic Film and ASTM D3354 for Blocking Testing of Plastic Film and Sheet |
In the past, film and paper producers and converters have had the choice of test stands and universal test machines which are either value-priced peak-force-only machines, or expensive computer-operated integral-load cell machines.
Now you can have the best of both worlds in a single instrument. The Series MT-500 is a simple to use, stand-alone console operated tester, with optional Quality Control software for automatic calculation and graphical display of break, yield, modulus and other, tension and compression force information.
Improved Film & Paper Quality, Increased Profit Margins
The Series 500 Force Test Stand is a proven tool for more closely controlling nominal peak strength and elongation characteristics to speed your:
|
The MT-522 shown with Force Gauge mounted to right of column for working table testing. |
| |
- Research and development of new film and paper products
- Inspection of incoming film and paper products
- In-process checks to ensure on-spec product for converting operations
- Quality-control reporting
|
| |
Advanced Technical Features in Each Model
Easy, Error-Free Operation
Two modes of operation: Operate as a stand-alone, manual system or Operate in Digital/Software mode using the Force Test Software to automatically calculate force values. |
| |
|
Expandable; Industry-Leading Software
Portable and expandable with optional software, printers and computer system. A computer is required for operation in the Digital/Software mode. Advanced software for display/hard-copy reporting of statistical and graphical analysis of data including yield, break strength, modulus and friction values.
Affordable
Best of all, the series 500 is economically priced.
Unique, Modular Design
Test Stand can be set up with Force Gauge mounted on the front of the column for easy access for strip testing, or with Force Gauge mounted to the right of the column for access to the large working table area for testing. |
| Technical Data |
| |
Model MT-516 |
Model MT-522 |
Model MT-528 |
| Mode of Operation: |
Off-line testing / lab use. Digital force measurement |
| Capacity: |
550 lb (2.5 kN) |
220 lb (1.0 kN) |
| Throat Depth: |
2.0 - 5.0 inch, adjustable |
| Force Gauge Mounting Options: |
1. Front Mounted
2. Right Hand over Work Table (Factory preset) |
| Materials: |
All Sheet Materials |
| Measurement Range: |
0 - 250 g, 0 - 500 g
0 - 2 kg, 0 - 5 kg.
0 - 20 kg, 0 - 100 kg (other ranges available) |
| Measurement Accuracy: |
± 0.10% Full Scale |
| Measurement Resolution: |
0.01 lb - 0.05 lb (Range dependent) |
| Speed Range: |
1.0 - 30 ipm
(2.0 - 60 ipm Optional)
(0.2 - 6.0 ipm Optional) |
| Speed Accuracy: |
± 2% Full Capacity |
| Speed Indicator: |
Digital 7-segment LED, 3-1/2 digit |
| Crosshead Travel: |
22.0 inches |
28.0 inches |
34.0 inches |
| Test Travel: |
6.0 inches |
22.0 inches |
28.0 inches |
| Operator Modes: |
Manual, single Return |
| Break Detect: |
Optional |
| Return Speeds: |
Maximum or Dial Speed |
| Power Requirements: |
115 VAC, 60 Hz, 230 VAC, or consult factory for special requirements |
| Overall Height / Weight: |
34 inch / 70 lb |
40 inch / 75 lb |
46 inch / 80 lb |
| Sample Rate: |
1000 / sec |
| Serial Data Communications: |
RS-232, 9-pin D-Sub |
|
Prices subject to change  Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
| Item Number |
Item |
Prices |
| Force Test Stands and Software |
| PT-920116 |
MT-516 Force Test Stand |
$2,695.00 |
| PT-920122 |
MT-522 Force Test Stand |
2,985.00 |
| PT-920128 |
MT-528 Force Test Stand |
3,485.00 |
| PT-920191 |
MT-500 Data Acquisition Software |
825.00 |
| Force Gauges for Test Stands |
| PT-920210 |
ZP-500 Force Gauge, USB (1 msec capture, 1 msec transmit) 250 gr, 500 gr, 2 kg, 5 kg, 20 kg (x .01 lb), 100 kg. Includes USB Cable, Data Logger Software |
1,385.00 |
| PT-920230 |
Z2-500 Force Gauge, RS-232 (1 msec capture, 500 msec transmit) 250 gr, 500 gr, 2 kg, 5 kg, 20 kg (x .01 lb), 100 kg |
1,255.00 |
| PT-920260 |
Serial Cable for Digital Force Gauge |
145.00 |
| Grips, General |
| PT-920311 |
Pneumatic grips, 0.1 kN (25 lb), Pair w/ 1 x 1 Inch inserts |
795.00 |
| PT-920315 |
Air Control Unit w/Regulator for Pneumatic Grips |
275.00 |
| PT-920319 |
Wedge Grip, 1000N, 15 x 5 mm Sample Size, Each |
358.00 |
| PT-920323 |
Wedge Grip, 10,000N, 25 x 10 mm Sample Size, Each |
388.00 |
| PT-920327 |
Pin Vice Grip, Each |
162.00 |
| PT-920331 |
Parallel Jaw Grips, 1000N, Serrated, Each |
295.00 |
| PT-920335 |
Lever Operated Cam Grip, 500N, Serrated, Each |
138.00 |
| PT-920337 |
Spring Loaded Roller Grip, 500N, 50 mm Wide, Each |
485.00 |
| Grips, Industry Specific |
| PT-920411 |
Pneumatic Grips, tissue, 0.1 kN (25 lb), Pair, w/ 1 x 1 inch inserts |
1,125.00 |
| PT-920415 |
Air Control Unit w/Regulator for Pneumatic Grips |
275.00 |
| PT-920419 |
Fixture, Filament, 250N, Miniature, Each |
310.00 |
| PT-920423 |
Cam Grip, Cable, 1000N, Serrated, Each |
185.00 |
| Compression Plates |
| PT-920510 |
Compression Plate, 2 inch, Vented, Each |
60.00 |
| Accessories, General |
| PT-920611 |
Extension Rod, 130mm, 10/32, Each |
38.00 |
| PT-920615 |
Extension Rod, 130mm, 5/16 - 18, Each |
40.00 |
| PT-920619 |
Chisel, Inverted, 1000N, 10/32, Each |
38.00 |
| PT-920623 |
Chisel Point, 1000N, 10/32, Each |
38.00 |
| PT-920627 |
Cone Point, 1000N, 10/32, Each |
38.00 |
| PT-920751 |
Block/Reblock Test Fixture |
485.00 |
|
 |
|
| Precision Universal Test Systems |
|
| MT-1500 Full-Featured Universal Test Stands for Film and Paper |
| Meets specifications of ASTM D882 Standard Test Method for Tensile Testing of Plastic Film and ASTM D3354 for Blocking Testing of Plastic Film and Sheet |
|
In the past, film and paper producers and converters have had the choice of test stands and universal test machines which are either value priced peak-force-only machines, or expensive computer-operated integral-load cell machines. Now you can have the best of both worlds in a single instrument.
Oakland Instrument offers the Series MT-1500, a simple to use computer operated tester, with Quality Control software for automatic calculation and graphical display of break, elongation, yield, modulus, and other, tension and compression force information.
The Series 1500 Precision Universal Test Stand is a proven tool for more closely controlling nominal and peak strength and elongation characteristics to speed your: Research and development of new film and paper products, Inspection of incoming film and paper products, In-process checks to ensure on spec product for converting operations, and Quality-control reporting.
On the left the Model MT-1522 Universal Tester with 20 kg (50 lb) Integral Load Cell. Shown with Load Cell mounted to Right of Column for Working Table Testing. |
| Advanced Technical Features in Each Model |
Expandable; Industry-Leading Software
Portable and expandable with optional software, printers and computer system. A computer is required for operation. Advanced software for display/hard-copy reporting of statistical and graphical analysis of data including yield, elongation, break strength, modulus, and friction values.
Affordable
Best of all, the series 1500 is economically priced.
Unique, Modular Design
Test Stand can be set up with Load Cell mounted on the front of the column for easy access for strip testing, or with Load Cell mounted to the right of the column for access to the large working table area for testing.
Advanced Engineering & Technology
|
- Tension & Compression Testing to 550 pounds
- Peak Force, Average Force, and Stress/Strain Testing
- Servo Drive and Integral Load Cells
- Broad Speed Range for full range of testing requirements, 0.1 - 40 ipm
- Uses Timeclock & Speed data for elongation computation
- Computer controlled with Model MT-2500 Software for full range of testing and graphical & statistical display
|
| Technical Data |
| |
Model MT-1516 |
Model MT-1522 |
Model MT-1528 |
Model MT-1540 |
| Mode of Operation: |
Off-Line testing / lab use, Digital force measurement |
| Capacity: |
550 lb (2.5 kN) |
| Throat Depth: |
2.0 - 5.0 inch, adjustable |
| Load Cell Mounting Options: |
1. Front Mounted
2. Right Hand over Work Table (Factory preset) |
| Materials: |
All Sheet Materials |
| Measurement Range: |
0 - 250 g, 0 - 500 g,
0 - 2 kg, 0 - 5 kg,
0 - 20 kg, 0 - 100 kg.
(other ranges available) |
| Measurement Accuracy: |
±0.10% Full Scale |
| Measurement Resolution: |
0.01 lb |
| Speed Range: |
0.1 - 40 ipm |
| Speed Accuracy: |
±0.5% Full Capacity |
| Crosshead Travel: |
22.0 inches |
28.0 inches |
34.0 inches |
46.0 inches |
| Test Travel: |
16.0 inches |
22.0 inches |
28.0 inches |
40.0 inches |
| Return Speeds: |
Maximum or Jog Speed |
| Power Requirements: |
115 VAC, 60 Hz, 230 VAC, or consult factory for special requirements |
| Overall Height / Weight: |
34 inch 70 lb |
40 inch / 75 lb |
46 inch / 80 lb |
58 inch / 90 lb |
| Sample Rate: |
1000 / sec |
| Serial Data Communications: |
RS-232, 9-pin D-Sub(2) |
| Model MT-500/1500 Data Acquisition Software |
|
Oakland Instrument Corp.’s MT-500 Data Acquisition Software system includes Hardware and Software to add computer-based operation and output of Graphics and Data Table Statistics.
Utilize the Console Controls of Your Test Stand And Collect Data with Ease: Your MT-500 Software collects data from motorized test stands with digital RS-232 force gauges. Use test stand console controls to operate motor, speed, and start/stop function. Oakland’s MT-500 Software collects data serially to provide application specific graphics and statistical information. |
| |
Create Custom Recipes with Ease: Setup parameters allow data collection and display flexibility including test mode, scaling, and many more.
Operator Recall of Recipes for Automatic, Error-free Setup and Operation: Recipes or “Test Types” can be recalled with the click of a button, to automatically set up your force tester for immediate
operation.
Mutliple Test Modes Built-in including Tensile, 1% Secant, Coefficient of Friction, Peel, Seal, TEA,Tensile Stiffness...
Full ASTM Test Data Reporting Capabilities... |
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
| Item Number |
Item |
Prices |
PT-921003
|
MT-1516 Precision Force Test Stand, Computer Software Controlled |
$4,240.00 |
| PT-921015 |
MT-1522 Precision Force Test Stand, Computer Software Controlled |
4,530.00 |
| PT-921027 |
MT-1528 Precision Force Test Stand, Computer Software Controlled |
5,030.00 |
| PT-921040 |
MT-1540 Precision Force Test Stand, Computer Software Controlled |
5,820.00 |
| PT-920191 |
Software MT-500 Data Acquisition |
825.00 |
| PT-921090 |
Z2-1500 Load Cell |
1,255.00 |
| PT-920260 |
Serial cable for digital load cell |
145.00 |
|
|
| Accessories |
|
| For Force Test Stands and Tensile Testers |
| PT-923210 - Peel Test Fixture, 180 Degree |
|
| Meets ASTM D-903 - Peel or Stripping Strength of Adhesive Bonds, Peel Test Fixture, 180 degree Metal Face, Specify Sheet Metal Plates Required, Upper Grip Required to Complete Fixture Package, Requires Crosshead Speed of 12 ipm |
|
|
| |
| PT-923215 - Peel Test Fixture, 90 Degree |
|
| Peel Test Fixture, 90 degree, Metal Face, Travels Perpendicular to Crosshead For Forces > 10 lb, Upper Grip Required to Complete Fixture Package, For Forces < 10 lb., Add: Travel Synchronizing Cable/Pulley Option (Not Shown in Photo), Upper Grip Required to Complete, Fixture Package |
|
 |
| |
| PT-923220 - Peel/Seal Test Fixture, T-Peel or Seal, Rubberized Face |
|
| Peel/Seal Test Fixture, T-Peel or T-Seal, Rubberized Face, Upper Grip Required to Complete Fixture Package |
|
 |
 |
| PT-923225 - 3-Point Bending Fixture |
|
| Meets ASTM F-1575 Determining Bending Moment of Nails, Upper & Lower, 0.375 inch Cylindrical Bearing, Points,1.1 - 2.2 inch Length Between Bearing Points, Adjustable, Requires Crosshead Speed of 0.25 ipm |
|
| |
 |
| PT-923230 - Coefficient of Friction Fixture |
|
| Meets ASTM D-1894 Static and Kinetic Coefficient of Friction of Plastic Film and Sheeting, Meets TAPPI T-549 Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of Horizontal Plane Method, 200 Gram Weight w/ Attachment Wire, Carrier Sled Attachment w/Pulley, Requires Crosshead Speed of 6.0 ipm |
|
| |
 |
| PT-923235 - Cling Peel Fixture |
|
| Meets ASTM D-5458 Peel Cling of Stretch Wrap Film, Inclined Plane Fixture and COF Carrier Sled w/Pulley, Sample Clamp, Wire Stabilizing Legs Included, Requires Crosshead Speed of 5.0 ipm |
|
| PT-923240 - Blocking Test Fixture |
|
| Meets ASTM D-3354 Blocking Load of Plastic Film by the Parallel Plate Method Procedure B Using Constant Rate of Separation Test Device, Blocking Load Test Fixture for Plastic Film, 4.00 x 4.00 inch Blocks, Requires Crosshead Speed of 0.2 ipm |
|
|
| |
| PT-923245 - Puncture Test Fixture, Pneumatic Sample Clamping |
|
Meets Federal Test Method 101B and 101C, Puncture Resistance of Flexible Packaging and Industrial Fabric, Puncture Test Fixture, w/ Pneumatic Sample Clamping, 1.00 inch Dia. Sample Area, 0.25 inch Dia. Radiused Rod Tip, Includes Air Control Unit and Regulator, Requires Crosshead Speed of 1.0 ipm
Meets ASTM F-1306 Slow Rate Penetration, Testing of Barrier Films and Laminates, Puncture Test Fixture, w/Pneumatic Sample Clamping, 1.375 inch Dia. Sample Area, 0.125 inch Dia. Radiused Rod Tip, Includes Air Control Unit and Regulator, Requires Crosshead Speed of 1.0 ipm |
|
 |
| |
| PT-923250 - Shrink Force Test Heating Chamber, Retractable |
|
| Retractable Chamber, Air-Driven, 60 - 150° C (140 - 300° F) Temperature Range, 2.00 inch (H) x 1.00 inch (W) Sample Test Area |
|
 |
 |
| PT-923255 - Tubing Friction Test Fixture |
|
Submersible Tray for Securing Tube Samples, Machined Water Bath Pan, Temperature Control Console for Water Bath Heaters
70° - 110°F Temperature Range, Ports (2) for Additional Water Recirculation System, Requires Crosshead Speed of 6.0 ipm |
|
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
| Item Number |
Item |
Prices |
| PT-923210 |
Peel Test Fixture, 180 Degree |
$395.00 |
| PT-923215 |
Peel Test Fixture, 90 Degree |
385.00 |
| PT-923220 |
Peel/Seal Test Fixture, T-Peel or Seal,
Rubberized Face |
395.00 |
| PT-923225 |
3-Point Bending Fixture |
695.00 |
| PT-923230 |
Coefficient of Friction Fixture |
825.00 |
| PT-923235 |
Cling Peel Fixture |
850.00 |
| PT-923240 |
Blocking Test Fixture |
485.00 |
| PT-923245 |
Puncture Test Fixture, Pneumatic Sample Clamping |
725.00 |
| PT-923250 |
Shrink Force Test Heating Chamber, Retractable |
5,985.00 |
| PT-923255 |
Tubing Friction Test Fixture |
2,795.00 |
|
|
|
|
