Site Map 
Contact Us |
|
Site Map Contact Us |
| Pencil Durometers |
 |
Models 201 & 202, ASTM Type A or D
Meets or Exceeds Current ASTM D 2240 Specifications
 |
For rubber, rubber like materials & soft plastics.
|
|
|
| The instrument uses a dial gauge with a full 360° scale and bold easy to read numbers. The dial scale can easily be read to 1/2 point readings. A standard Max-hold hand remains at the peak reading until reset. Anew barrel design has a textured surface for a more secure grip while making hand held measurements. Durometer comes complete with a precision aluminum test block and carrying case. The instrument's small 1/2" diameter base allows access to confined, hard to reach areas. These durometers meet or exceed all aspects of ASTM D2240 specifications. Certification traceable to NIST is available for nominal cost. |
| Specifications |
|
Model 201 - Type A & Model 202 - Type D |
|
| Accuracy: | ±1 point |
| Height: | 5-5/16 in. (13.5 cm) |
| Width: | 2-1/4 in. (5.7 cm) |
| Depth (Indicator): | 1-1/2 in. (3.8 cm) |
| Weight: | 6.5 oz. (184 g) |
| Shipping Weight: | 3 lb. (1.4 kg) |
| Available Items |
 |
|
| Item Number | Item |
| HA-201 | Model 201 ASTM Type A Pencil Durometer |
| HA-202 | Model 202 ASTM Type D Pencil Durometer |
|
|
 |
| 302SL Hardness Tester |
|
For Foam & Sponge Rubber
| Measures the hardness of soft materials such as foam rubber, sponge rubber, disposable diapers, jells, doughs, etc. The instrument is based on the force of a variable load over an area of one square centimeter and is simply placed on the material to be checked. The resettable ancillary hand records the peak reading. The pointer can be observed for material creep over a specified time interval if needed. Several readings should be made and the results averaged. The sample should have an area of at least 1- 1/4" square and be at least 3/4" thick. Thinner materials must be stacked (do not glue) to obtain this thickness. |  |
| Specifications |
|
| Accuracy: | ±2.8gf |
| Height: | 4 in. (10.2 cm) |
| Width: | 2-1/4 in. (5.7 cm) |
| Depth Weight:(Indicator): | 1-3/4 in. (4.4 cm) |
| Weight: | 9-1/2 oz. (269 g) |
| Shipping Weight: | 3 lb. (1.4 kg) |
| Finish (Case): | Blue mottle |
| Test Stand (Accessory): | Model 470 |
| Available Items |
|
|
| Item Number | Item |
| HA-302SL | Hardness Tester for Foam and Sponge Rubber, complete w/ Ancillary Hand, Test Block and Carrying Case |
| HA-470 | Test Stand |
|
|
| We invite inquiries on custom durometers, made to your specifications. |
| Paul N. Gardner Company, Inc. • Phone 1.800.762.2478 • Fax 954.946.9309 |
