| Home > Products > Film Thickness > Dry Film > Certified Standards, Calibration Foils & Calibration Standards |
 |
 |
| Certified Coating Thickness Standards |
 |
|
| |
 |
| Three Piece Set consists of: |
| |
- One (1) zero plate
- Two (2) coated plates in a vinyl wallet.
|
| |
| Choose Ferrous or Non-ferrous stock set with nominal values of 0.8 and 3.5 thousand/mil. |
| |
| |
 |
| Technical Data |
| Area of Measurement: |
8mm diameter centered on the white exposed area |
| Uncertainty: |
±0.25μm up to 6000μm and ±0.40μm from 6000μm to 12500μm at a confidence level of 95% |
| Calibration Standard: |
Calibrated slip gauges measured & NATA/NAMAS/NIST certified |
| Traceability: |
Calibrated in a NATA registered laboratory using International, Standards traceable to NAMAS, NIST Certified traceable |
| Period of Validity: |
These Coating Thickness Standards should be compared with calibration blocks, or slip gauges, every
twelve (12) months |
| Substrate Type: |
Non-Ferrous = Aluminum; Ferrous = Mild Steel |
| Substrate Surface Finish: |
Surface ground then polished to 2μm |
| Technical Data |
| Area of Measurement: |
8mm diameter centered on the white exposed area |
| Uncertainty: |
±0.25μm up to 6000μm and ±0.40μm from 6000μm to 12500μm at a confidence level of 95% |
| Calibration Standard: |
Calibrated slip gauges measured & NATA/NAMAS/NIST certified |
| Traceability: |
Calibrated in a NATA registered laboratory using International Standards traceable to NAMAS, NIST Certified traceable |
| Period of Validity: |
These Coating Thickness Standards should be compared with calibration blocks, or slip gauges, every
twelve (12) months |
| Substrate Type: |
Non-Ferrous = Aluminum; Ferrous = Mild Steel |
| Substrate Surface Finish: |
Surface ground then polished to 2μm |
|
 |
Prices subject to change  Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
|
| Item Number |
Item |
Prices |
| Three Piece Sets |
| DS-4054 |
Ferrous (mild steel) Set |
$355.00 |
| DS-4064 |
Non-Ferrous (aluminum) Set |
355.00 |
| Five Piece Sets |
| DS-4010 |
Ferrous (mild steel) Set |
456.00 |
| DS-4030 |
Non-Ferrous (aluminum) Set |
456.00 |
| Custom sets are also available on request at an additional cost and delivery. Quantity breaks available. |
|
| NIST Calibration Standards |
|
| Certified National Institute of Standards & Technology |
| For Coating Thickness Gauges With Zero Plate |
 |
Each set of Certified Standards consists of five (5) mild steel test plates mounted on a 4" x 6" hardboard. Four (4) test plates are precision chrome coated, and identified both in metric and inch. The fifth (5th) test plate is a zero plate.
These magnetic type thickness SRM’s (Standard Reference Material) are 45 mm x 45mm (1.75 x 1.75
inches) for calibrating coating thickness gages used to measure the thickness of nonmagnetic coating on steel, or nickel on steel. Each plate consists of AISI 1010 cold rolled sheet steel substrate with a uniform coating of copper that is overplated with a thin protective layer of chromium. The standards are mounted in vinyl leafs in a small ring binder.
These SRM’s may be used to calibrate instruments used to measure the thickness of paint and other organic coatings on steel, as well as zinc (galvanized) and other nonmagnetic metallic coatings. |
| Test Data Example |
| For SRM 1362b |
Coupon
Serial Number |
130619990119 |
137019990127 |
131119990114 |
131219990103 |
| Coating Thickness |
38.0 ± 0.5µm
1.50 mils |
77 ± 1.2µm
3.02 mils |
143 ± 2.1µm
5.63 mils |
191 ± 2.9µm
7.51 mils |
| Standard Uncertainty |
0.144µm |
0.74µm |
1.46µm |
0.59µm |
| SRM Serial Number: 136219990057 |
Assembly Date: Monday, July 26, 1999 |
|
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
|
| SRM
Item Number |
Zero Plate Plus
Unit Size |
Nominal Coating Thickness |
Prices |
| Microns |
Mils |
| Nonmagnetic Coating on Magnetic Substrate (CU and CR on steel) |
| DS-SRM-1358b |
Set of 4 |
20, 80, 255, 1000 |
.80, 3.1, 9.8, 39 |
$890.00 |
| DS-SRM-1359b |
Set of 4 |
48, 140, 505, 800 |
2.0, 5.5, 20, 32 |
890.00 |
| DS-SRM-1361b |
Set of 4 |
6, 12, 25, 48 |
0.2, 0.5, 1.0, 2.0 |
890.00 |
| DS-SRM-1362b |
Set of 4 |
40, 80, 140, 205 |
1.6, 3.1, 5.5, 7.9 |
890.00 |
| DS-SRM-1363b |
Set of 4 |
255, 385, 505, 635 |
9.8, 16, 20, 26 |
890.00 |
| DS-SRM-1364b |
Set of 4 |
800, 1000, 1525, 1935 |
32, 39, 59, 79 |
890.00 |
|
|
|
 |
|
|
