Site Map    Contact Us
Search Our Site



 

 

Phascope PMP 10

Quality Control of PC-Boards and Electroplated Surfaces

 

The Phascope PMP10 uses the phase-sensitive eddy-current test method according to the draft standard ISO/DIS 21968. Compared to conventional eddy-current method according to DIN EN ISO 2178, this measuring method has significant advantages for the thickness measurement of metallic surface coatings. By using the phase position of the probe signal instead of the amplitude for the coating thickness computation, the interfering influences of the specimen shape and of the probe lift-off are significantly reduced. Phascope PMP 10
Copper Coating Measurements For PC-Board Production Available Probes:
  • ESL080 for Cu thickness measurements in PCboard boreholes in a range from 5 - 80 μm (0.2 - 3.2 mils).
  • ESD20Cu for surface copper thickness measurements on PC-boards.
    1 - 100μm (0.4 - 4 mils) at 240 kHz
    1 - 270 μm (0.4 - 10.8 mils) at 60 kHz

 


 Phascope Screen Close Up
Close up of the screen
Measurement of Non-Ferrous Metal Coatings on Steel, NF or Iso Substrate Materials
  • ESD20Cu for the measurement of non-ferrous metal (NF) coatings of Cu, Al, brass, etc. on elecr. non-conducting (Iso) substrate materials.
  • ESD20Zn for NF coatings on steel or iron, in particular with rough surfaces, or for NF coatings with a high electr. conductivity on NF substrate materials with a low conductivity, e.g., Cu/brass.
  • ESD20Ni for Ni/Fe
    1 - 50μm (0.04 - 2 mils) at 240 kHz
    2 - 100μm (0.08 - 4 mils) at 60 kHz
  • ESD2.4 for Zn/Fe on small parts

 

Phascope with Probe

 Phascope with Probe

 

Available items
Item Number Item
DF-850551 Phascope PMP10
Probes
DF-850561 ESD20Zn probe (nfe/Fe)
DF-850563 ESD2.4 probe (Zn/Fe small parts)
DF-850565 ESD20Ni probe (Ni/Fe)
DF-850567 ESD20Cu probe (Cu/ISO)
DF-850569 ESL080 probe (Cu in PCB Bores)

 

Home   Dry Film   How To Order   |Top Of The Page Paul N. Gardner Company, Inc. • Phone 1.800.762.2478 • Fax 954.946.9309