Site Map    Contact Us
Search Our Site



Elcometer Model 157 Pull Off Gage


  • Accuracy ±15%
  • 3 Scales on the instrument body
  • Easy to use and lightweight
    Pre-calibrated with no adjustment required
  • Insensitive to hot and cold coatings or surface
 Model 157 Pull Off Gage

 

Operating Instructions

Extremely simple to operate, this pen-shaped, triangular section gauge is held vertically, above a horizontal surface. The magnet tip is placed on the coating to be measured and the body is slowly raised. When the magnet "breaks" away from the surface, the reading viewed at this point indicates the coating thickness.

157 Pull Off Gage Diagram

 

Available items
Item Number Item
DF-A157- - - - A Model 157 Pull Off Gage, complete with three scales, case and instructions for use

 

 

Pentest Thickness Gage

It "Holds" The Thickness Reading

Pentest Thickness Gage

 

  • From 1 mil to 30 mils and 25 microns to 700 microns.
  • Paint, zinc, tin, lacquer, asphalt, porcelain enamel, etc. on steel.
  • Accuracy ±15%
  • Comes complete in leather case.
  • No power supply required.
  • Compact size.

 

Instructions

Hold gage like a pen on Slide Rule Indicator (SR1), between first and second fingers with thumb on top. Place Pentest with Rubber Anti-Skate Ring on the Dry Coating to be measured, push the SRI down until magnet touches the surface with a “click”. Pull the SRI at a slow steady pace until the magnet detaches from coating surface and a “click” is heard. Coating thickness can then be read in mils or microns

 

Available items
Item Number Item
DF-0600 Pentest Dual Scale Coating Thickness Gage

 

Home   Dry Film   How To Order   |Top Of The Page Paul N. Gardner Company, Inc. • Phone 1.800.762.2478 • Fax 954.946.9309