Tipping Lever - Model 31
For one-man loading of heavy drums on to Morse Drum Cradle Trucks Models 40.

Constructed with 40" (101.6cm) steel tubing and malleable iron double hook. DH-31

Cradle Truck - Model 46
Specifically designed to handle 15 gals (57 liters) drums 13-3/4" (35cm) above floor. Four 3" Mortuf wheels.

Rock-over loading eliminates lifting drum. Shipped ready to use by UPS. DH-46

“No Spill” Drum Truck - Model 125
Designed for one-man moving of most types of drums and barrels. Hinged handle offers simple maneuverability allowing the user to extend the handle away from the load for extra leverage.

Handle stores in upright position. Two 8" MORTUF polyolefin wheels and one swivel caster give excellent control. Cap. 1200 lb (545 kg) ShIp Wgt. 45 lb (20.5 kg) in a durable carton with handle disconnected. Suitable for UPS. DH-125

Handstand Drum Truck - Model 155
Stands by itself for space saving storage. Light in weight but tough enough to handle 1000 lb. (454 kg) loads. Footrest helps in loading and supports the loaded truck.

Rolls easily and quietly on 10" x 2-1/2" (25.4 x 6.35 cm) rubber mold-on wheels with self-lubricating, plain bearings. Designed for 30,55 & 85 gallon (114 to 322 liter) drums. Ship weight 46 lb. (24 kg.) Shipped in carton w/handle disconnected. Suitable for UPS. DH-155

Can Tipper - Model 15
Handles 5 gal (19 liter) round cans. Safety lock holds container.

Dispensing height 10" (25 cm). Folds for storage. Ring can be bent to accept square cans. Wgt 9 lb. (4 kg). DH-15

Drum Lifting Hook
Lifts horizontal 55 gal (210 liter) steel drums, 34-36" (86-92 cm) long. Alloy steel lifting ring, steel rods, malleable iron hooks. Capacity 1000 lb. (454 kg) DH-41

Spark resistant drum lifting hook made of bronze and copper. Capacity750 lb.DH-41-M

Hand Trucks - Models 152 and 153
Trim, tough all steel welded construction for strength with ease of use and low price. Easy to load and move, strong and reliable. Capacity 1000 lb. (454 kg). Designed for 30, 55 & 85 gallon (114 to 322 liter) drums.

Model 152 has 10" x 2-1/2" (25.4 x 6.35 cm) rubber mold-on wheels with self-lubricating, plain bearings. Model 153 has 10" MORTUF polyolefin wheels. Shipped in carton w/handle disconnected. Suitable for UPS. DH-152 & DH-153

Multi-Purpose Drum Truck - Model 160
This new truck makes moving and dispensing a breeze! It can also be used to move drums on or off pallets. It's a completely new design for extra safety, ease of use, and versatility. Four equally large 8" polyolefin roller bearing wheels carry the load, no burden for the user. Moves through narrow aisles with hands protected by the u-shaped handle.

The extendable support prop allows it to self-stand for storage and stabilizes it in dispensing position. Toe prongs are set at precise angles to load efficiently and are broad and blunt to be protective of plastic drums. Handles various types of drums 14-28" (36-71 cm) diameter and 29-1/2" - 41" (75-104 cm) tall including 55 and 30 gallon steel drums, 85 gallon salvage drums and most late model rimmed plastic drums. Also for fibre drums with sufficiently deep rim recess for hook engagement. DH-160

Hydra-Lift Rotators - Model 456-3, 456-460, 456A, 456-E1& 456-E3
Built-in hydraulic system positions drum quickly and easily. Developed to provide easier “Hands-Off” drum handling and mixing.

It accepts an upright steel drum, tilts it to horizontal and rotates it. Also returns drum to upright. A selector switch and on-off buttons and a hydraulic valve give complete control at one station. Model #456-A has air motor.

Morse Multi-Purpose Drum Pump - Models 26, 27, 28 Series
Five models of corrosion resistant hand-operated pumps for various liquids up to 2000 SSU. Double acting piston design pumps on both forward and back strokes to deliver 22 gal. (23 liter) per 100 strokes. May be padlocked.

Includes 8 foot (2.4m) discharge hose, threaded fitting for 2" pipe thread bung and suction tube to reach the bottom of a 55 gallon drum. Models 26 and 27 are not for acids or caustics. (10 lb.)

Self Closing Safety Faucet - Model 62-5 & Model 60D
For dispensing flammable or non-flammable liquids. Built-in flame arrestor. Factory Mutual approved for OSHA compliance. Brass plated body. Steel handle may be padlocked. 3/4" pipe thread. NOT or use with acids, high alkaline's, chlorinated solvents or Ketones. DH-62-5The Model 60-D Similar to 62-5 but natural zinc finish, no flame arrestor. For non-flammable liquids only. DH-60D

Morplug Bung Wrench - Model 59
New design with many surfaces and shapes to fit virtually all drum plugs. Works with steel, fiber or plastic drums. Solid ductile iron one piece construction for durability.

Generous size for extra leverage and hand clearance. Use with drums of nonflammable materials. DH-59

Morplug Spark Resistant Bronze Wrench - Model 59SRM
Same generous size and universal pattern as Model 59 but made of manganese bronze to be spark-resistant. The use of a spark-resistant wrench is an extra precaution when using drums of flammable material. The high ultimate strength and extra elasticity of manganese bronze give an extra measure of durability. Natural bronze finish. DH-59-SRM

Morplug Spark Resistant Z-A Alloy Wrench - Model 59SRZ
Same generous size and universal pattern as Model 59 but made of zinc aluminum alloy to be spark resistant. This alloy was selected for its high strength, toughness and economy. Natural bright silver color. DH-59-SRZ

Portable Drum Rotator - Model 201
Compact, portable mixer and drain stand rolls closed drum to agitate contents. Reduces loss of ingredients. Since the drum is closed there is no worker exposure,less clean-up. Easy loading and unloading with built-in tipping bar. Contents may be dispensed thru a faucet.

Portable Drum Rotator With Variable Drum Rolling Speed - Model 201VS (not shown)
Similar to Model 201 but the transmission is designed to allow the user to vary the speed (10 to 24 RPM) to suit requirements. Ideal for experimental use. Some users prefer fast initial rolling with slower continued gentle agitation after the initial mix.

Portable Fibre Drum Rotator - Model 201B
Designed for rolling fibre drums. Endless belts ride on crowned pulleys to turn fibre drums. Accommodates 16" to 23" (41-59cm) dia. up to 35" (89cm) long.

The capacity for liquid load is 300 lb. (126kg). For dry loads the capacity depends on choice of fixed speed. When ordering specify factory set speed and motor type.

Stationary Drum Rotator - Model 1-5154 
Designed to handle heavier loads and more severe duty. Secures to floor for permanent installation. Idler plate can be adjusted for 6-28" (15-71cm) dia. drums.

1/2 HP motor drives worm gear speed reducer that provides a fixed speed drive to a solid 1" (2.54cm) dia. shaft with four 6" (15.2cm) dia. neoprene drive wheels. Choose from several factory set speeds. Available with variable speed as Model 1-5154VS.

Stationary Drum Rotator - Model 2-5154
Mix two drums at once. The Rotator handles up to 1000 lb. (454 kg) of liquid in each of two drums. Doubles capacity of single drum units.

1-5154VS, 2-5154VS are the variable speed, one and two drum stationary rotators. Variable speed drive permits changing the speed to suit requirements. Ideal for experimental use or with materials that may have different optimum rolling speeds.

No. 305 Can Tumblers
Mix or Tumble Small Batches Quickly and Economically
Mix inside closed 5 gallon cans, one or two at a time. You can mix, blend, agitate liquid or dry materials or tumble parts with media for polishing or deburring. The cans are held at an angle to the horizontal rotating shaft which results in thorough “corner-over-corner” mixing action.

The use of ordinary cans can be an economical alternative to special mixing vessels. Keeping the lid in place while agitating can reduce hazards and save clean-up. Structural steel can holder has adjustable hold-down. Hand wheel and threaded rod with locking handle provide a quick, secure clamping action to hold the can closed and in place during rotation. Accepts cans up to 12-1/2" diameter and 4-1/2" - 16-1/2" tall, including typical 5 gallon cans. Other sizes and types may be accommodated on special order. Morse Can Tumblers do not comply with OSHA unless they are installed in accordance with OSHA subpart 0.1910.212 - “General requirements for all machines”.

Endover Rotator - Model 1-300
For heavy duty mixing requirements. End-over-end action. Dry powders, wet grains, dyes, viscous settled substances, etc.

Can put valuable ingredients back into suspension and leave drums cleaner. Sturdy frame is designed to accept the stress of heavy loads.