• Handles as easily as smaller blenders and holds twice as much.
  
• Two Liter (half gallon) capacity
  
• Stainless Steel container and blending assembly
  
• 2 speed, 1 HP Motor
  
• Zinc die cast base
  
• 2-piece vinyl cover
  
• Neoprene rubber drive eliminates excessive wear
  
• Can utilize AD2 adaptor for accessory use Model MX-HGBSS Stainless steel top housing 120V CSA Certified Unit available: MX-HGCSS Model HGB150 has Polycarbonate top housing (Not Shown)

• 2.4 liter (2.5 qt.) polycarbonate bowl & cover
  
• 1/2 h.p. motor with thermal overload protection
  
• 1800 RPM (no load) - 120V, 60Hz, 4.2 Amps U.L. Listed
  
• Complete with cutting blade, funnel & pusher
  
• Dual mode operation: Continuous & Pulse
  

• Four Liter (one gallon) capacity
  
• Settings: OFF/LO/MED/HI/PULSE
  
• RPM: 15,800/18,000/20,800
  
• Available with timer (MX-CB15T)
  
• Base: Die cast - grey coating
  
• Bearing: High performance ball bearing
  
• Height: 26" overall / Weight: 34 lbs., net-shipping weight 38 lbs
  
• UL, NSF, C-UL Listed
  
• Container: Stainless Steel container, blades, lid with gasket & stopper
  and two handles

• 1.2 liter (40 oz.) heat resistant glass container with handle and 2 piece cover
  
  
• 2 speed motor, 3 wire grounded cord
  
  
• Epoxy Coated Base
  
  
• Accepts all one quart and mini containers
  
  
• Requires external compressed air system capable of delivering a minimum of 10 SCFM, discharging at 15 PSIG

• 18,500 RPM (no load)
  
• 115 Volts AC 50-60 Hz, 8.0 Amp
  
• Totally enclosed/ single phase, 1 speed universal motor
  
• U.L. listed Class 1, Group D
  
• Max. Ambient temperature rating 40°C
  
• BHL blenders do not include switch, containers or power cords
  
• MX-HL515 (1 liter) stainless steel container available for use with MX-BHL120 and MX-BHL240

• Explosion-proof UL approved motor
  
  
• Single-speed or variable-speed versions available
  
  
• Maximum speed 11,500 rpm
  
  
• May be used with 4-Liter containers or any blending container when used with adapter accessory

The explosion-proof motor is UL approved (applies to motor only) for Class I, Group D and Class II, Group E and F operation. Model 8017 is a single-speed blender operating at 11,500 rpm. Model 8018 is a variable-speed version of the 8017. It will provide constant torque in a speed range from 1,150 to 11,500 rpm. blender is powered by a PWM scalar drive and speed is monitored by a digital display.

Although both blenders are designed to use a 4-Liter Stainless Steel container, you can adapt unit to fit all blending containers with the use of a Model 8051 adapter. Both Model 8017 and 8018 must be installed by a qualified electrician to preserve their explosion-proof capability. Units are supplied without container, power switch or adapter.

• 2 speed positive push button, solid state control
  
• MX-7011S -Stainless container not shown
  
• Stainless Steel blades
  
• Epoxy -powder coated die-cast zinc base with chrome collar
  
• Accepts all mini containers
  
• CSA Models available
  
• 1 liter (32 oz.) stainless steel or 1.2 liter (40 oz.) heat resistant glass container w/ handle & 2 piece cover

• Seven speed, positive push button, solid state control with SCR
  
  
• 1 liter (32 oz.) SS or 1.2 liter (40 oz.) heat resistant glass container with handle (2 piece cover)
  
  
• Stainless steel blades
  
  
• Epoxy -powder coated die-cast zinc base (with chrome collar)
  
  
• Speeds from 7,000 to 25,000 RPM (free running)
  MX-7012G-Glass container not shown

• Single speed motor
  
  
• 1 liter (32 oz.) stainless steel or 1.2 liter (40 oz.) heat resistant glass container with handle and 2 piece cover
  
  
• Stainless steel blades
  
  
• Epoxy -powder coated die-cast zinc base with chrome collar
  
  
• MX-700G-Glass container not shown

• Variable Speed from 1,000-22,000 RPMs (no load)
  
  
• 120 V, 60HZ, 3.0 AMPS, .4HP
  
  
• Base is chrome & green epoxy powder coated
  
  
• 1 liter (32 oz.) stainless steel or 1.2 liter (40 oz.) heat resistant glass container w/ handle & 2 piece cover

• Reduces 10 grams of tablets to a powder in 10 seconds at 20,000 rpms
  
  
• Snap tight, green vinyl lid
  
  
• Container disassembles for easy cleaning
  
  
• 75 grams dry capacity
  
  
• Stainless steel container and pulverizing blade
  
  
• Fits all Waring commercial laboratory blenders

• Stainless Steel container and one piece stainless steel lid and knob
  
• Unique blade for dry homogenizing and pulverizing
  
• Stainless Steel base
  
• 500 ML approximate working capacity
  
• Some substances require use of adapter and larger motor units (example: soil processing requires use of 4 liter base& AD1 adapter)