 |
| Hand Held - Air Powered - Quic Mixers |
 |
|
| Variable Speed, Explosion Proof for Painters & Maintenance Contractors, Etc. |
Quic Mixers - Designed for standard and extra heavy duty use, these hand held mixers are unsurpassed for mixing paint, resins, chemicals, epoxies, mud, ink, adhesives, block fillers, and slurries. The variable speed explosion-proof air motors develop up to 3/4 HP. Motors will not burn out if stalled or overloaded. Mixes 5 gallons to 55 gallons. Speed range is 300 to 3000 RPM. Will mix 5 gallons in less than 5 minutes. |
 |
|
 |
| |
|
| MX-MAM - Series Quic Mixers are equipped with a plated-steel straight coupler & stainless steel mixing shaft & paddle. The patented double ring design of the paddle eliminates any damage to the container. |
MX-MAC - Series Quic Mixers are equipped with an adjustable chuck that has a 1/2" capacity and a stainless steel mixing shaft and paddle same as MAM Series Mixers. |
 |
MX-AM149 - Air powered Quic Mixer complete with speed control and adjustable chuck. Without mixing shaft and paddle. Will take any mixing paddle with shaft diameter up to 1/2" |
|
| Quic Mixer - Ring Mount |
|
| Portable Mixer For 5 Gallon Pails |
 |
 |
 |
| Closed
(For Entering) |
 |
| Open
(For Mixing) |
Works through the lid. The lid need not be removed for mixing.The Quic Mixers are now equipped with Quic Change Couplers. Which eliminates the bother of fumbling with set screws when changing mixing shafts. Just twist on & twist off without tools.
It’s portable and light weight. The ring mount provides a low center of gravity for steady, worry-free mixing. Works equally well on Open or Closed fives. The folding impellers will fit through any opening as small as 1-1/2" diameter. Mixes colorants in paint, remixes settled materials and blends powders with liquids. Blends 5 gallons in less than 5 minutes. Shipped complete ready to go right out of the box. No assembly required. |
|
Prices subject to change  Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
| Item Number |
Item |
Prices |
| MX-MTS-Q |
1/2 HP Two Speed Electric– Has the added versatility of a thermally protected 2 speed open, drip proof motor; 1725 rpm for heavy material, 1140 rpm for thin material. Heavy duty 1/2HP motor operates on 120V AC, 60Hz, single phase. Complete with cord, plug, switch, mixing shaft and 4-1/2" folding impellers. Complete, ready to use. |
$663.00 |
| MX-MJF-Q |
1/2 HP Totally Enclosed Two Speed Electric– Has totally enclosed fan cooled 2 speed motor; 1725 rpm for heavy material, 1140 rpm for thin material. Heavy duty 1/2 HP motor operates on 120V AC, 60 Hz, single phase. Complete with cord, plug, switch, mixing shaft and 4-1/2" folding impeller. Complete, ready to use. |
784.00 |
| MX-MEP-2Q |
Two Speed 1/2 HP Explosion Proof Electric-This model has 2 speeds; 1725 rpm for heavy material, 1140 rpm for thin material. Heavy Duty 1/2 HP motor operates on 120V AC , 60 Hz, single phase. Complete with cord, switch, mixing shaft and 4 1/2" folding impellers. (No plug included) |
1,386.00 |
| MX-MAT-Q |
Air Motor–Gast 2AM Air Motor. Delivers up to 3/4 HP for your mixing requirements. Speed may be varied from 300 to 3000 rpm @ maximum air pressure of 100 psi. Explosion proof. Light weight, will not burn-out when overloaded or stalled. Complete with mixing shaft, 4-1/2" folding impeller, muffler and speed control valve. Ready to use. |
663.00 |
| MX-MAM-Q |
Air Motor– Gast 4AM Air Motor. Delivers up to 1-1/2 HP for your toughest mixing requirements. Speed may be varied from 300 to 3000 rpm @ maximum air pressure of 100 psi. Explosion proof. Light weight, will not burn out when overloaded or stalled. Complete with mixing shaft, dual folding impeller, muffler and speed control valve. Ready to use. |
744.00 |
|
| Accessories For Quic Mixers |
 |
Extra Mixing Impellers |
MX-MSA-Q mixing shaft for ring mount with 2" overall diameter folding impeller. For very thin materials such as solvents and stains. MX-MST-Q mixing shaft for ring mount with 3" overall diameter folding impeller. For thin materials. MX-MSF-Q mixing shaft for ring mount with 4-1/2" overall diameter folding impeller.
Our standard size impeller for most materials. MX-MSS-Q mixing shaft for ring mount with 5-1/2" overall diameter folding impeller. For moderately heavy materials. MX-MSI-Q mixing shaft for ring mount with 2 sets of impellers. The lower set is 5- 1/2" in diameter and the upper set is 3". Excellent for extra heavy materials and paint such as blockfillers. |
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
| Item Number |
Item |
Prices |
| MX-MSA-Q |
Mixing Shaft for Ring Mount with 2" overall diameter folding impeller. For very thin materials such as solvents and stains. |
$94.00 |
| MX-MST-Q |
Mixing Shaft for Ring Mount with 3" overall diameter folding impeller. For thin materials. |
94.00 |
| MX-MSF-Q |
Mixing Shaft for Ring Mount with 4-1/2" overall diameter folding impeller. Our standard size impeller for most materials |
94.00 |
| MX-MSS-Q |
Mixing Shaft for Ring Mount with 5-1/2" overall diameter folding impeller. For moderately heavy materials |
94.00 |
| MX-MSI-Q |
Mixing Shaft for Ring Mount with 2 sets of impellers. The lower set is 5-1/2" in diameter and the upper set is 3". Excellent for extra heavy materials and paint such as blockfillers . |
112.00 |
|
 |
 |
MX-HCO Hole Cutter - Hand model for use if container lid does not have screw top hole for insertion of mixing shaft. Cuts 1-1/2" dia. hole. MX-HCO-E Hole Cutter - Foot assisted model with 18" extension handle and foot pad. Cuts 1-1/2" dia. hole. |
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
| Item Number |
Item |
Prices |
| MX-DEV-C |
For 5/8" Motor Shaft. Couplers - Quic Change – Used for attaching mixing impellers to mixer motor. |
$79.00 |
| MX-DEV-C5 |
For 1/2" Motor Shaft. Couplers - Quic Change – Used for attaching mixing impellers to mixer motor. |
79.00 |
| MX-PSP |
Plastic Seal Plugs – For metal or plastic lids. Pkg of 100 |
15.00 |
| MX-PSS-2 |
Plastic Seal Plugs – For metal or plastic lids. Pkg of 1000 |
89.00 |
| MX-AET |
Automatic Timer– Allows you to time your mixing without errors. Automatically stops your mixer at any desired time up to 30 minutes. |
75.00 |
| MX-AET-60 |
Automatic Timer - Same as above, up to 60 minutes. |
75.00 |
| MX-HCO |
Hole Cutter Hand model for use if container lid does not have screw top hole for insertion of mixing shaft. Cuts 1-1/2" dia. hole. |
54.00 |
| MX-HCO-E |
Hole Cutter Foot assisted model with 18" extension handle and foot pad. Cuts 1-1/2" dia. hole. |
75.00 |
|
|
| Heavy Duty Top Mount Pail Mixer |
|
New FGM Series features a ring mount similar to Quick-Mixers, which guarantees easy mounting over the middle of the pail.
|
 |
A version to suit any mixing application. Shafts are stainless steel, 5/8" diameter and 15" long. Electric models complete with cord and switch; air models have muffler and speed control valve.
Quic change coupler is standard for fast, easy shaft removal. Propellers are 9" diameter aluminum and are adjustable anywhere on shaft. Lightweight and portable; shipped complete. Solid Stainless Steel pail cover option allows easier cleaning. Variable speed models available. |
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
| Item Number |
Motor |
HP |
RPM |
Propellers |
Prices |
| Type |
Phase |
Voltage |
| Electric Models |
| MX-FGM-5T |
TEFC |
1 |
115 |
1/2 |
350 |
2 |
$1,289.00 |
| MX-FGM-7T |
TEFC |
1 |
115 |
3/4 |
350 |
3 |
1,363.00 |
| MX-FGM-1T |
TEFC |
1 |
115 |
1 |
350 |
3 |
1,413.00 |
| MX-FGM-5V |
TEFC |
1 |
115 |
1/2 |
0-350 |
2 |
2,172.00 |
| MX-FGM-7V |
TEFC |
1 |
115 |
3/4 |
0-350 |
3 |
2,335.00 |
| MX-FGM-1V |
TEFC |
1 |
115 |
1 |
0-350 |
3 |
2,429.00 |
| Air Models |
| MX-FGM-5A |
Air |
— |
— |
3/4 |
0-600 |
2 |
1,373.00 |
| MX-FGM-1A |
Air |
— |
— |
1-1/2 |
0-600 |
3 |
1,436.00 |
| Optional Stainless Steel Pail Cover on any model: add "S" suffix to the model number |
|
|
| Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
| Item Number |
Item |
Prices |
| MX-DEV-S |
Mixing Shaft, 5/8" diameter by 15" long Quic-Change pin. Stainless Steel |
50.00 |
| MX-AP958 |
Propeller, Extra propeller for above—2 bladed, 9" diameter aluminum with 5/8" bore, set screw for mounting |
47.00 |
| MX-DEV-C |
Extra Quic Change Coupler for above, 5/8" bore |
79.00 |
|
|
|
|
