Site Map    Contact Us
Search Our Site

 

 

 

FX-i and FX-iWP Series

 

FXi Series FXi Series

 

Realizing Compact, Increasing Functions!
The FX-i incorporates the reduced size Compact Super-Hybrid Sensor (SHS), which continues to provide
quick (one second) readings with high precision. The new Statistical Calculation Function (SCF) provides statistical data display or output of weighed samples. Six models are available from 120g x 0.001g to 3200g x 0.01g.


The World’s First IP65 Compliant, Water/Dust Proof Precision (1 mg) Balance!
The FX-iWP is the first Water proof/Dust proof, 0.001 g compact precision balance. The FX-iWP incorporates the reduced size Compact Super-Hybrid Sensor (SHS), which continues to provide quick (one second) readings with high precision. The new Statistical Calculation Function (SCF) provides statistical data display or output of weighed samples. Six models are available from 120g x 0.001g to 3200g x 0.01g.

 

Response Indicator Function
Selectable FAST, MID or SLOW response to suit weighing environment conditions

ACAI - Automatic Counting Accuracy Improvement
This counting function recalculates the average unit weight each time a sample is added to eliminate
errors caused by variations in unit weight

Comparator Function
Easy to compare weighing results by setting HI limit and LO limit to display HI, OK, LO indicator

Percent Mode Function
A sample can be registered as 100% and the weight or another sample can be compared as a percentage.

Animal Weighing Function
The HOLD function enables freezing of weighing data for animal weighing applications and an
ANIMAL indicator appears on the display.

Underhook
The underhook, for hanging applications, allows for measurement of magnetic materials and density
measurements in air and water		 Standard RS-232C Interface
Incorporates bi-directional communication with a PC, printer or other peripheral devices

Multiple Weighing Units of Measurement
Programmable or standard weighing units of measurement can be selected; g, pcs, %, oz, lb, L oz, ozt, ct, mom, dwt, GN, tl tol, mes and MLT

GLP/GMP/GCP/ISO Compliant
In accordance with GLP and LIMS regulations, the balance ID number and calibration data can be printed out using A&D’s AD-8121B or a PC

Auto Power OFF Function
The display switches OFF automatically when the balance is inactive for 10 minutes as a power-saving tool

Auto Power ON Function
The weighing mode display activates automatically
with AC power so there is no need to press the ON/OFF key

Built-in Rechargeable Battery (FXi-09)*
An optional Ni-MH rechargeable battery pack can be fitted into the FX-i series for use without AC power and for mobile applications
*Not IP65 compliant when used with FX-iWP


  FX-120i
FX-120iWP		 FX-200i
FX-200iWP		 FX-300i
FX-300iWP		 FX-1200i
FX-1200iWP		 FX-2000i
FX-2000iWP		 FX-3000i
FX-3000iWP
Weighing Capacity: 122g 220g 320g 1220g 2200g 3200g
Minimum Weighing Value: 0.001g 0.01g
Counting Mode Min Unit Mass: 0.001g
0.01g
# of Samples: 5, 10, 25, 50 or 100 pieces
Percent Mode Min 100% Ref Mass: 0.001g 1.00g
Min 100% Display: 0.01%, 0.1%, 1% (depends on the reference mass stored)
Repeatability (Standard Deviation): 0.001g 0.01g
Linearity: ±0.002g ±0.02g
Stabilization Time (set at FAST): Approx. 1 second
Sensitivity Drift (10°C to 30°C): ±2ppm / °C
Operating Temperature: 5°C to 40°C (41°F to 104°F), 85%RH or less (no condensation)
Display Type: Vacuum Fluorescent Display (FVD)
Display Refresh Rate: 5 times / second, 10 times / second or 20 times / second
Standard Serial Interface: RS-232C Interface
Weighing Pan (Diameter) : 130mm 150mm
External Calibration Mass: 100g
50g		 200g
100g		 300g
200g
100g 		1000g
500g 		2000g
1000g 		3000g
2000g
1000g
AC Adaptor: Confirm that the adaptor type is correct for the local voltage and power receptacle
Power Consumption: Approx. 11VA (supplied to the AC adaptor)
External Dimensions: 193 (W) x 262.5 (D) x 85.5 (H) mm
Net Weight: FX- Approx. 2.5kg / FX-iWP Approx. 2.7kg

 

Available items
Item Number Item
BL-FX-120i FX-120i Balance, 122g capacity w/Breeze Break (3.4”H)
BL-FX-120iWP FX-120iWP Balance, same as above with Water/Dust Proofing
BL-FX-200i FX-200i Balance, 220g capacity w/Breeze Break (3.4”H)
BL-FX-200iWP FX-200iWP Balance, same as above with Water/Dust Proofing
BL-FX-300i FX-300i Balance, 320g capacity w/Breeze Break (3.4”H)
BL-FX-300iWP FX-300iWP Balance, same as above with Water/Dust Proofing
BL-FX-1200i FX-1200i Balance, 1220g capacity
BL-FX-1200iWP FX-1200iWP Balance, same as above with Water/Dust Proofing
BL-FX-2000i FX-2000i Balance, 2200g capacity
BL-FX-2000iWP FX-2000iWP Balance, same as above with Water/Dust Proofing
BL-FX-3000i FX-3000i Balance, 3200g capacity
BL-FX-3000iWP FX-3000iWP Balance, same as above with Water/Dust Proofing

 

Options
Item Number Item
BL-FXi-02* Quick USB Interface with cable Large Breezebreak
Large Breezebreak
BL-FXi-08* Ethernet Interface with WinCT-Plus software
BL-FXi-09* Built-in rechargeable battery
BL-FXi-10 Small breeze break (3.4”H)
BL-FXi-11 Large breeze break (7.9”H)
BL-FXi-WP-10 Small breeze break (gray) (3.4”H)
BL-FXi-WP-11 Large breeze break (gray) (7.9”H)
BL-FXi-12 Animal weighing pan
BL-FXi-15 Carrying case
* FXi-02, FXi-08 and FXi-09 cannot be used at the same time.
(Not IP65 compliant when used with FX-iWP)

 

Accessories
Item Number Item
BL-AD-1683 Static eliminator Compact Printer
Compact Printer
BL-AD-8920* Remote display
BL-AD-8922* Remote controller
BL-AD-8121B* Compact printer
BL-AD-8526* RS/Ethernet converter
BL-AX-K02737-500-EX Waterproof RS-232C cable (5m)
*(Not IP65 compliant when used with FX-iWP)

 

Home   Balances   How To Order   |  Top Of The Page Paul N. Gardner Company, Inc. • Phone 1.800.762.2478 • Fax 954.946.9309