Electrostatic Gun High Voltage Meter
NEW! Low Cost Precision Instrument For The Electrostatic Sprayer

With the New Powdatest any electrostatic sprayer can now quickly measure the electrostatic voltage at the spray gun tip. This corona point is where the electrostatic voltage must be maintained at the correct voltage. This voltage can be up to 100,000 volts and can be either positive or negative charged. Using the Powdatest will allow this actual gun voltage to be quickly and accurately measured. The Powdatest is a simple, easy to use, very accurate hand held instrument which has a safe measuring probe which can be easily placed on the gun tip. Instant digital display with resolution to 0.1kV of the actual gun voltage is then obtained. The Powdatest can be used to check and allow calibration of existing console displays, and also can be used to trace faults such as poor high voltage cable connections, cable breakages, dirt, grease etc., on the gun body which could affect the actual gun voltage but not be shown on the console displays. Ideal for quickly testing guns after reassembly and multiple gun systems.
Workpiece current in the range of 0.1 -199.9 micro amp. can be measured using the adaptor and cable supplied as an accessory. This can be used by the operator to detect the amount of powder application before back ionization occurs. A current adaptor and cable is available as an optional accessory.
Supplied complete with high voltage probe, 5 meters earth cable, battery fitted, instrument and probe carrying cases.
The current emphasis in the Powder Coating Field is to ensure that the efficiency of the electrostatic powder painting process is maintained at as high a level as possible and by using the New Powdatest as part of a Quality Control System will allow its low initial cost to be recovered many times over.

The accuracy of current measurement is: