+1 (954) 946-9454

TQC Automatic Film Applicator Standard

Article No. 11206

Auto Film Applicator,Heated Vac Bed 230V

  • Automatic Film Applicator with Perforated Heated Vacuum Bed
  • Built-in heating mat which allows temperature of the table to be elevated up to +100°C above ambient temperature
  • The powerful heating device guarantees an even distribution of the temperature over the entire vacuum plate
  • 230V

Select your model

$12,295.00 excl. taxes & shipping cost

Features

  • Provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors
  • Eliminates variations in speed, pressure and direction of draw down that can cause irregularities
  • Charts up to A3 and scrub size max.
  • Compatible with a large range of application tools
  • Produce a large number of identical laboratory precision draw downs in a short period of time.
  • Drying Time Recorder option
  • Preset range option
  • Easy intuitive operating interface with Triple i Control (Intelligent Illumination Interface)
  • Paper Clamp / Vacuum manually operable
  • Full color display
  • Easy to update software
  • Great for: Coatings Laboratories, Paint Production, Surface Finishing and Powder Coating
  • Multiple types of automatic film applicators are available for either glass/paper/metal substrates or foils.

Technical Attributes

  • Data
    Traverse Speed:0.1 - 500 mm/s
    Traverse Speed Accuracy:+/- 1% of set speed
    Stroke Length:50 – 430mm / 1.97 – 16.93 in
    Stroke Length Accuracy:+/- 2 mm / +/- 0.08 in
    Max. Test Chart Size:515 x 300 mm / 20.28 x 11.81 in
    Max. Test Chart Thickness:9 mm / 0.35 in
    Max. Thickness of Test Substrate:35 mm / 1.38 in incl. coating
    Max. Vacuum Area:DIN A3 / Scrub
    Automatic Vacuum Areas:DIN A5, DIN A4, DIN A3, Scrub
    Wire Bar Spiral Area:max. 325 mm / max. 12.8 in
    Min. Wire Bar Length:345 mm / 13.58 in
    Max. Wire Bar Diameter:10 mm / 0.39 in at fixation points
    Width Alternative Applicators:max. 300 mm / max. 11.81 in
    Height Alternative Applicators:10 -80 mm / 0.39 - 3.15 in
    Dimensions and WeightDepth: 490 mm / 19.29 in
    Width: 640 mm / 25.2 in
    Height: 290 mm / 11.42 in
    Net weight: 33 kg
    Power Supply:100 - 240 V / 50 - 60 Hz
    Power Consumption:max. 50 W
    Display:480 x 272 pixel TFT display
    Controls:5-key Navigation Switch, Mouse and Keyboard (optional)
    Menu Languages:English, Spanish, Chinese, Polish, German, French, Italian, Japanese, Russian

More Information

Safety Precautions & Disclaimer
Always clean the instrument after use. Do not use compressed air to clean the instrument. Never perform repairs or service to the instrument yourself. This should be done by TQC or selected distributors.

Always make sure the instrument is connected to an earthed socket. Maintenance and inspection should be carried out at the correct intervals. Operating personnel should be informed before starting with maintenance or repair work. Always make sure the instruments power is turned off and the instrument is not connected to a socket while adjusting any electrical component whenever maintenance, inspection or repair work is done. Do not open the instrument. In case of malfunction always consult the manufacturer. The right of technical modifications is reserved.

The information given in this sheet is not intended to be exhaustive and any person using the product for any purpose other than that specifically recommended in this sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. While we endeavour to ensure that all advice we give about the product (whether in this sheet or otherwise) is correct we have no control over either the quality or condition of the product or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of the use of the product. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development

Standards

ASTM D823

Delivery Content

All Models - Automatic Film Applicator, 24V Adapter, Manual, Wire Bar Weight
Join our Email List. subscribe
CANCEL