Certified Coating Thickness Standards
Article No. 11218
Gardco Certified 5 Pc Std Set - Fe
- Certified Fe Thickness Standard Set
- 5 piece set
- Ferrous measurement
Features
- The Certified Coating Thickness Standards come in your choice of two sets. Both sets have a ferrous or non-ferrous option.
- Area of Measurement 8mm diameter centered on the white exposed area
- Calibrated slip gages measured & NATA/NAMAS/NIST certified
- Calibrated in a NATA registered laboratory using International Standards traceable to NAMAS, NIST Certified traceable
- These Coating Thickness Standards should be compared with calibration blocks, or slip gages, every twelve (12) months
Technical Attributes
-
- Data
-
Area of Measurement: 8mm diameter Uncertainty: ±0.25μm up to 6000μm and ±0.40μm from 6000μm to 12500μm at a confidence level of 95% Substrate Type: Non-Ferrous = Aluminum; Ferrous = Mild Steel Substrate Surface Finish: Surface ground then polished to 2μm
Delivery Content
The 5 Pc set has one zero plate, one standard that has a nominal value of 2 mils (50.8 microns), 2nd standard that has a nominal value of 6 mils (152.4 microns), 3rd standard nominal value of 10 mils (254 microns) and a fourth standard that has a nominal value of 20 mils (508 microns)